B2580 – OBD-II DTC

OBD-II DTC B2580 – Aux Blower Sense Switch Circuit Failure

DTC B2580 meaning

DTC B2580 refers to an issue with the Aux Blower Sense Switch Circuit. This diagnostic trouble code indicates that the vehicle’s onboard diagnostic system has detected a malfunction in the circuit responsible for monitoring the auxiliary blower motor’s operation. The auxiliary blower is typically used to enhance cabin air circulation and improve climate control efficiency.

DTC B2580 symptoms

Common symptoms associated with DTC B2580 may include:

• Inoperative auxiliary blower motor
• Reduced cabin air circulation
• Inconsistent or erratic blower operation
• Illumination of the check engine light or other warning indicators

DTC B2580 causes

Several factors can lead to the triggering of DTC B2580, including:

• Faulty auxiliary blower motor
• Damaged or corroded wiring in the blower circuit
• Defective blower sense switch
• Issues with the vehicle’s control module
• Poor electrical connections or grounding issues

DTC B2580 seriousness

The seriousness of DTC B2580 can vary based on the symptoms experienced. While it may not pose an immediate safety risk, it can lead to decreased comfort due to inadequate climate control. Prolonged neglect of this issue may result in further electrical problems or damage to the HVAC system.

How to diagnose DTC B2580

To diagnose DTC B2580, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC B2580.
2. Inspect the auxiliary blower motor for any visible damage or obstructions.
3. Check the wiring and connectors for signs of wear, corrosion, or loose connections.
4. Test the blower sense switch for proper operation using a multimeter.
5. Examine the vehicle’s control module for any related fault codes or issues.

How to fix DTC B2580 step-by-step instructions

To fix DTC B2580, follow these steps:

1. Repair or replace any damaged wiring or connectors in the auxiliary blower circuit.
2. Replace the faulty auxiliary blower motor if it is not functioning correctly.
3. Replace the defective blower sense switch if testing indicates it is faulty.
4. Ensure all electrical connections are secure and free of corrosion.
5. Clear the DTC using an OBD-II scanner and test the system to ensure proper operation.

How to erase DTC B2580

To erase DTC B2580, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Access the scanner’s menu and select the option to clear or erase trouble codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the vehicle to verify that the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.