B2591 – OBD-II DTC

OBD-II DTC B2591 – Detent Signal Missing During Unlatch

DTC B2591 meaning

DTC B2591 refers to a diagnostic trouble code indicating that the detent signal is missing during the unlatch process of a vehicle’s system. This code is typically associated with the electronic control unit (ECU) that monitors the operation of various components, including door locks and latching mechanisms. The detent signal is crucial for confirming that the latch has been properly disengaged, and its absence can lead to issues with the locking system.

DTC B2591 symptoms

Common symptoms associated with DTC B2591 may include:

• Inability to unlock or unlatch doors or trunk
• Warning lights illuminated on the dashboard
• Erratic behavior of the locking system
• Failure of remote keyless entry functions

DTC B2591 causes

Several factors can lead to the occurrence of DTC B2591, including:

• Faulty detent switch or sensor
• Wiring issues, such as shorts or open circuits
• Corrosion or damage in the connector terminals
• Malfunctioning electronic control unit (ECU)
• Software glitches or programming errors

DTC B2591 seriousness

The seriousness of DTC B2591 can vary depending on the vehicle’s design and the specific symptoms present. While it may not pose an immediate safety risk, it can lead to:

• Inconvenience due to inability to access the vehicle
• Potential security risks if doors cannot be locked
• Further damage to the locking mechanism if left unaddressed

How to diagnose DTC B2591

To diagnose DTC B2591, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Inspect the detent switch and associated wiring for damage or corrosion.
3. Check the ECU for any software updates or known issues.
4. Test the detent switch for proper operation using a multimeter.
5. Examine the vehicle’s wiring harness for continuity and shorts.

How to fix DTC B2591 step-by-step instructions

To fix DTC B2591, follow these step-by-step instructions:

1. Clear the DTC using an OBD-II scanner.
2. Inspect and repair any damaged wiring or connectors related to the detent switch.
3. Replace the detent switch if it is found to be faulty.
4. Reprogram or update the ECU if necessary.
5. Test the system to ensure the issue is resolved and the detent signal is functioning correctly.

How to erase DTC B2591

To erase DTC B2591, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to check if the code reappears.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.