B2593 – OBD-II DTC

OBD-II DTC B2593 – Power Sliding Door Opened During Module Close Command

DTC B2593 meaning

DTC B2593 refers to a diagnostic trouble code indicating that the power sliding door was opened during a command to close the module. This code is specific to vehicles equipped with power sliding doors and is part of the On-Board Diagnostics II (OBD-II) system. The code suggests a conflict between the door’s operational state and the command issued by the vehicle’s control module.

DTC B2593 symptoms

Common symptoms associated with DTC B2593 may include:

• Power sliding door not closing properly
• Door may open unexpectedly
• Warning lights on the dashboard
• Inconsistent operation of the sliding door

DTC B2593 causes

Several factors can lead to the triggering of DTC B2593, including:

• Faulty door position sensors
• Malfunctioning power sliding door motor
• Wiring issues or short circuits in the door control circuit
• Faulty control module or software glitches
• Obstructions preventing the door from closing

DTC B2593 seriousness

The seriousness of DTC B2593 can vary based on the symptoms and the impact on vehicle safety. While it may not pose an immediate danger, a malfunctioning power sliding door can lead to:

• Increased risk of injury if the door opens unexpectedly
• Inconvenience for passengers
• Potential for further electrical issues if not addressed

How to diagnose DTC B2593

To diagnose DTC B2593, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Inspect the power sliding door for any visible obstructions or damage.
3. Check the door position sensors for proper operation.
4. Examine the wiring and connectors for signs of wear or damage.
5. Test the power sliding door motor for functionality.
6. Review the control module for any software updates or faults.

How to fix DTC B2593 step-by-step instructions

To fix DTC B2593, follow these step-by-step instructions:

1. Clear the DTC using an OBD-II scanner.
2. Perform a visual inspection of the power sliding door and its components.
3. Repair or replace any damaged wiring or connectors.
4. Test and replace faulty door position sensors if necessary.
5. Check and replace the power sliding door motor if it is not functioning.
6. Reprogram or update the control module if required.
7. Recheck the system for any new codes after repairs.

How to erase DTC B2593

To erase DTC B2593, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.