B2604 – OBD-II DTC

OBD-II DTC B2604 – Power Sliding Door On/Off Switch Open Circuit

DTC B2604 meaning

DTC B2604 refers to a diagnostic trouble code indicating an open circuit in the power sliding door on/off switch. This code is triggered when the vehicle’s onboard diagnostic system detects that the signal from the power sliding door switch is not reaching the control module as expected. The open circuit can result from a variety of issues, including wiring problems or a faulty switch itself.

DTC B2604 symptoms

Common symptoms associated with DTC B2604 may include:

• Power sliding door not functioning
• Inability to open or close the sliding door using the switch
• Warning lights on the dashboard related to the sliding door
• Unusual noises when attempting to operate the sliding door

DTC B2604 causes

Several factors can lead to the triggering of DTC B2604, including:

• Faulty power sliding door on/off switch
• Damaged or frayed wiring in the door harness
• Corrosion or poor connections at the switch or control module
• Faulty control module for the sliding door

DTC B2604 seriousness

The seriousness of DTC B2604 can vary depending on the situation. While it may not pose an immediate safety risk, it can lead to inconvenience due to the malfunctioning sliding door. If left unaddressed, it may result in further electrical issues or damage to the door mechanism over time.

How to diagnose DTC B2604

To diagnose DTC B2604, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the B2604 code.
2. Inspect the power sliding door switch for visible damage or wear.
3. Check the wiring and connectors for signs of corrosion or breaks.
4. Test the continuity of the wiring between the switch and the control module.
5. Verify the operation of the control module by checking for other related codes.

How to fix DTC B2604 step-by-step instructions

To fix DTC B2604, follow these steps:

1. Disconnect the vehicle’s battery to ensure safety while working on electrical components.
2. Inspect and replace the power sliding door on/off switch if it is found to be faulty.
3. Repair or replace any damaged wiring or connectors in the door harness.
4. Clean any corrosion found on connectors to ensure good electrical contact.
5. Reconnect the battery and test the sliding door operation.
6. Use the OBD-II scanner to clear the DTC and check for any reoccurrence of the code.

How to erase DTC B2604

To erase DTC B2604, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Navigate to the option to clear or erase trouble codes on the scanner.
4. Confirm the action to erase the DTC.
5. Disconnect the scanner and start the vehicle to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.