C1097 – OBD-II DTC

OBD-II DTC C1097 – ABS Hydraulic Pump Motor Circuit Short To Ground

DTC C1097 meaning

DTC C1097 refers to a diagnostic trouble code indicating a short circuit to ground in the ABS hydraulic pump motor circuit. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle systems for faults. The ABS (Anti-lock Braking System) hydraulic pump is crucial for maintaining proper brake function, and a short to ground can disrupt its operation.

DTC C1097 symptoms

Common symptoms associated with DTC C1097 may include:

• Illumination of the ABS warning light on the dashboard
• Loss of ABS functionality
• Increased stopping distances
• Unusual noises from the ABS module
• Potential activation of the traction control warning light

DTC C1097 causes

Several factors can lead to the occurrence of DTC C1097, including:

• Damaged wiring or connectors in the ABS hydraulic pump circuit
• Corrosion or poor connections at the ABS module
• Faulty ABS hydraulic pump motor
• Short circuits due to exposed wires or components
• Issues with the ABS control module

DTC C1097 seriousness

DTC C1097 is considered a serious issue as it directly affects the vehicle’s braking system. The ABS is designed to prevent wheel lock-up during braking, and a malfunction can lead to reduced braking efficiency and increased risk of accidents. It is essential to address this code promptly to ensure safe vehicle operation.

How to diagnose DTC C1097

To diagnose DTC C1097, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the C1097 code.
2. Inspect the ABS hydraulic pump motor circuit for visible damage, such as frayed wires or loose connections.
3. Check the ABS module and connectors for corrosion or poor connections.
4. Test the ABS hydraulic pump motor for proper operation using a multimeter.
5. Perform a continuity test on the wiring to ensure there are no shorts to ground.
6. Consult the vehicle’s service manual for specific testing procedures related to the ABS system.

How to fix DTC C1097 step-by-step instructions

To fix DTC C1097, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the electrical system.
2. Inspect the wiring and connectors in the ABS hydraulic pump circuit for damage or corrosion.
3. Repair or replace any damaged wires or connectors as necessary.
4. Test the ABS hydraulic pump motor and replace it if it is found to be faulty.
5. Reconnect all connectors and ensure they are secure.
6. Reconnect the vehicle’s battery.
7. Use an OBD-II scanner to clear the DTC and perform a test drive to verify that the issue is resolved.

How to erase DTC C1097

To erase DTC C1097, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.