C1100 – OBD-II DTC

OBD-II DTC C1100 – ABS Pump Switch Circuit Failure

DTC C1100 meaning

DTC C1100 refers to a fault in the ABS (Anti-lock Braking System) pump switch circuit. This code indicates that the ABS control module has detected an issue with the electrical circuit that controls the ABS pump switch. The pump switch is crucial for the proper operation of the ABS system, as it activates the pump to maintain brake pressure during an anti-lock braking event.

DTC C1100 symptoms

Common symptoms associated with DTC C1100 may include:

• Illumination of the ABS warning light on the dashboard
• Increased stopping distances
• Loss of ABS functionality
• Unusual noises from the ABS pump during operation

DTC C1100 causes

Several factors can lead to the occurrence of DTC C1100, including:

• Faulty ABS pump switch
• Wiring issues such as shorts, opens, or corrosion in the circuit
• Defective ABS control module
• Poor electrical connections or damaged connectors

DTC C1100 seriousness

DTC C1100 is considered a serious issue as it directly affects the vehicle’s braking system. The ABS system is designed to prevent wheel lock-up during braking, which enhances vehicle control and safety. If the ABS is not functioning properly, it can lead to longer stopping distances and increased risk of skidding, especially in slippery conditions.

How to diagnose DTC C1100

To diagnose DTC C1100, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the C1100 code.
2. Inspect the ABS pump switch and its wiring for visible damage or corrosion.
3. Check the electrical connections for tightness and cleanliness.
4. Test the ABS pump switch using a multimeter to ensure it operates within specifications.
5. Examine the ABS control module for any signs of failure or damage.
6. Clear the DTC and perform a test drive to see if the code reappears.

How to fix DTC C1100 step-by-step instructions

To fix DTC C1100, follow these step-by-step instructions:

1. Start by inspecting the ABS pump switch and wiring for any visible issues.
2. If the switch is faulty, replace it with a new one.
3. Repair or replace any damaged wiring or connectors in the ABS pump switch circuit.
4. Test the ABS control module for proper operation and replace it if necessary.
5. Reconnect all components and ensure all connections are secure.
6. Clear the DTC using an OBD-II scanner and perform a test drive to verify the repair.

How to erase DTC C1100

To erase DTC C1100, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Access the diagnostic menu on the scanner and select the option to clear or erase trouble codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.