C1101 – OBD-II DTC

OBD-II DTC C1101 – ABS Hydraulic Valve Circuit Failure

DTC C1101 meaning

DTC C1101 refers to a fault in the ABS (Anti-lock Braking System) hydraulic valve circuit. This code indicates that the vehicle’s onboard diagnostic system has detected a malfunction in the hydraulic valve that controls brake fluid flow to the wheels. The hydraulic valve is crucial for maintaining proper brake function, especially during emergency braking situations.

DTC C1101 symptoms

Common symptoms associated with DTC C1101 may include:

• Illuminated ABS warning light on the dashboard
• Increased stopping distances
• Unresponsive or erratic ABS operation
• Potential loss of traction control functionality
• Brake pedal pulsation during braking

DTC C1101 causes

Several factors can lead to the triggering of DTC C1101, including:

• Faulty hydraulic valve assembly
• Wiring issues such as shorts, opens, or corrosion in the circuit
• Defective ABS control module
• Low brake fluid levels or contamination
• Faulty wheel speed sensors

DTC C1101 seriousness

DTC C1101 is considered a serious issue as it directly affects the vehicle’s braking system. If left unaddressed, it can lead to:

• Increased risk of brake failure
• Reduced vehicle control during braking
• Potential accidents due to compromised braking performance

How to diagnose DTC C1101

To diagnose DTC C1101, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the C1101 code.
2. Inspect the ABS hydraulic valve and associated wiring for visible damage or corrosion.
3. Check the brake fluid level and condition.
4. Test the ABS control module for proper operation.
5. Examine wheel speed sensors for faults or disconnections.
6. Clear the code and perform a test drive to see if the code reappears.

How to fix DTC C1101 step-by-step instructions

To fix DTC C1101, follow these steps:

1. Inspect and repair any damaged wiring or connectors in the ABS hydraulic valve circuit.
2. Replace the faulty hydraulic valve assembly if necessary.
3. Ensure the brake fluid is at the correct level and free from contamination.
4. Test and replace any defective wheel speed sensors.
5. Reprogram or replace the ABS control module if it is found to be faulty.
6. Clear the DTC using an OBD-II scanner and perform a test drive to verify the repair.

How to erase DTC C1101

To erase DTC C1101, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “ON” position without starting the engine.
3. Access the diagnostic menu on the scanner and select the option to clear or erase trouble codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.