C1109 – OBD-II DTC

OBD-II DTC C1109 – Speed Control Actuator Assembly Cable Release Failure

DTC C1109 meaning

DTC C1109 refers to a diagnostic trouble code indicating a failure in the speed control actuator assembly cable release. This code is typically associated with issues in the vehicle’s cruise control system, specifically related to the mechanism that controls the release of the speed control actuator. When this code is triggered, it suggests that the actuator is unable to disengage properly, which can affect the vehicle’s ability to maintain or release speed control settings.

DTC C1109 symptoms

Common symptoms associated with DTC C1109 may include:

• Inability to engage or disengage cruise control
• Erratic or inconsistent speed control
• Warning lights illuminated on the dashboard
• Unresponsive accelerator pedal when cruise control is active
• Potential engine performance issues

DTC C1109 causes

Several factors can lead to the triggering of DTC C1109, including:

• Faulty speed control actuator assembly
• Damaged or frayed actuator cable
• Electrical issues such as short circuits or open circuits in the wiring
• Corrosion or poor connections in the actuator circuit
• Malfunctioning cruise control switch or module

DTC C1109 seriousness

The seriousness of DTC C1109 can vary depending on the specific symptoms and the vehicle’s operational status. It is generally considered a moderate to serious issue because it directly affects the cruise control functionality, which can lead to unsafe driving conditions. If the speed control actuator fails to release, it may result in unintended acceleration or difficulty in controlling the vehicle’s speed, posing a risk to the driver and others on the road.

How to diagnose DTC C1109

To diagnose DTC C1109, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the C1109 code.
2. Inspect the speed control actuator assembly and cable for visible damage or wear.
3. Check the electrical connections and wiring for corrosion or loose connections.
4. Test the functionality of the cruise control switch and module.
5. Perform a continuity test on the actuator cable to ensure it is not broken.
6. Clear the code and perform a road test to see if the code reappears.

How to fix DTC C1109 step-by-step instructions

To fix DTC C1109, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the electrical system.
2. Inspect and replace any damaged or frayed speed control actuator cables.
3. Repair or replace any corroded or loose electrical connections.
4. Test and, if necessary, replace the speed control actuator assembly.
5. Check and replace the cruise control switch or module if found faulty.
6. Reconnect the battery and clear the DTC using an OBD-II scanner.
7. Perform a road test to confirm that the issue has been resolved and the code does not return.

How to erase DTC C1109

To erase DTC C1109, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Follow the prompts to confirm the erasure of the trouble codes.
5. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.