C1110 – OBD-II DTC

OBD-II DTC C1110 – ABS Power Relay Coil Circuit Failure

DTC C1110 meaning

DTC C1110 refers to a fault in the ABS (Anti-lock Braking System) power relay coil circuit. This code indicates that the ABS control module has detected a malfunction in the relay that powers the ABS system. The relay is crucial for supplying power to the ABS components, and any failure in this circuit can lead to a loss of ABS functionality.

DTC C1110 symptoms

Common symptoms associated with DTC C1110 may include:

• Illumination of the ABS warning light on the dashboard
• Loss of ABS functionality during braking
• Increased stopping distances
• Potential activation of the traction control warning light

DTC C1110 causes

Several factors can lead to the occurrence of DTC C1110, including:

• Faulty ABS power relay
• Wiring issues such as shorts, opens, or corrosion in the relay circuit
• Defective ABS control module
• Blown fuses related to the ABS system
• Poor ground connections affecting the relay operation

DTC C1110 seriousness

DTC C1110 is considered a serious issue as it directly impacts the vehicle’s braking system. The ABS is designed to prevent wheel lock-up during hard braking, and a malfunction can lead to reduced braking performance and increased risk of accidents. It is essential to address this code promptly to ensure safe vehicle operation.

How to diagnose DTC C1110

To diagnose DTC C1110, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the C1110 code.
2. Inspect the ABS power relay for any visible damage or corrosion.
3. Check the wiring and connectors associated with the relay for shorts or opens.
4. Test the ABS power relay using a multimeter to ensure it operates correctly.
5. Examine the ABS control module for any faults or issues.
6. Check related fuses to ensure they are intact.

How to fix DTC C1110 step-by-step instructions

To fix DTC C1110, follow these steps:

1. Replace the faulty ABS power relay if it is defective.
2. Repair or replace any damaged wiring or connectors in the relay circuit.
3. Ensure all ground connections are clean and secure.
4. Replace any blown fuses related to the ABS system.
5. If necessary, replace the ABS control module.
6. Clear the DTC using an OBD-II scanner and test drive the vehicle to ensure the issue is resolved.

How to erase DTC C1110

To erase DTC C1110, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Access the diagnostic menu on the scanner and select the option to clear or erase trouble codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the vehicle to check if the code reappears.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.