C1114 – OBD-II DTC

OBD-II DTC C1114 – ABS Power Relay Output Short Circuit To Ground

DTC C1114 meaning

DTC C1114 refers to a diagnostic trouble code indicating a short circuit to ground in the ABS power relay output circuit. This code is specific to the Anti-lock Braking System (ABS) and suggests that the power relay responsible for supplying voltage to the ABS module is experiencing an electrical fault, potentially leading to malfunctioning of the ABS system.

DTC C1114 symptoms

Common symptoms associated with DTC C1114 may include:

• Illumination of the ABS warning light on the dashboard
• Loss of ABS functionality
• Increased stopping distances during braking
• Unusual noises from the ABS module
• Potential activation of the traction control or stability control warning lights

DTC C1114 causes

Several factors can lead to the occurrence of DTC C1114, including:

• Faulty ABS power relay
• Wiring issues, such as damaged or frayed wires
• Corrosion or poor connections in the electrical circuit
• Short circuits in the ABS module or related components
• Faulty ABS control module

DTC C1114 seriousness

DTC C1114 is considered a serious issue as it directly affects the ABS system’s ability to function properly. The ABS is crucial for maintaining vehicle control during emergency braking situations. If left unaddressed, this code can lead to compromised braking performance, increasing the risk of accidents.

How to diagnose DTC C1114

To diagnose DTC C1114, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the C1114 code.
2. Inspect the ABS power relay for any visible signs of damage or corrosion.
3. Check the wiring and connectors associated with the ABS power relay for shorts or breaks.
4. Test the ABS power relay using a multimeter to ensure it is functioning correctly.
5. Examine the ABS control module for any faults or issues.
6. Clear the code and perform a road test to see if the code returns.

How to fix DTC C1114 step-by-step instructions

To fix DTC C1114, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the electrical system.
2. Locate the ABS power relay and inspect it for damage or corrosion.
3. If the relay is faulty, replace it with a new one.
4. Inspect the wiring harness and connectors for any signs of wear, damage, or corrosion.
5. Repair or replace any damaged wiring or connectors as necessary.
6. Reconnect the battery and clear the DTC using an OBD-II scanner.
7. Perform a road test to verify that the ABS system is functioning correctly and that the code does not return.

How to erase DTC C1114

To erase DTC C1114, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and turn off the ignition.
6. Start the vehicle and check if the ABS warning light is off and the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.