C1134 – OBD-II DTC

OBD-II DTC C1134 – Gear Shift position short to ground

DTC C1134 meaning

DTC C1134 refers to a diagnostic trouble code indicating a “Gear Shift Position Short to Ground” issue. This code is generated when the vehicle’s onboard diagnostic system detects that the signal from the gear shift position sensor is being shorted to ground. The gear shift position sensor is crucial for determining the current gear selection and ensuring proper transmission operation.

DTC C1134 symptoms

Common symptoms associated with DTC C1134 may include:

• Transmission not shifting properly
• Inability to shift into certain gears
• Check Engine Light illuminated
• Erratic or unexpected gear changes
• Vehicle may go into limp mode

DTC C1134 causes

Several factors can lead to the occurrence of DTC C1134, including:

• Faulty gear shift position sensor
• Wiring issues, such as frayed or damaged wires
• Corrosion or poor connections in the wiring harness
• Faulty transmission control module (TCM)
• Mechanical issues within the transmission

DTC C1134 seriousness

DTC C1134 is considered a serious issue as it can affect the vehicle’s ability to shift gears properly. This can lead to:

• Reduced vehicle performance
• Increased wear on transmission components
• Potential safety hazards due to unexpected gear changes
• Inability to drive the vehicle in certain conditions

How to diagnose DTC C1134

To diagnose DTC C1134, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Inspect the gear shift position sensor and its wiring for visible damage.
3. Check for any loose or corroded connections in the wiring harness.
4. Test the gear shift position sensor with a multimeter to ensure it is functioning correctly.
5. Examine the transmission control module for faults.
6. Perform a road test to observe any abnormal shifting behavior.

How to fix DTC C1134 step-by-step instructions

To fix DTC C1134, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety.
2. Inspect and repair any damaged wiring or connectors related to the gear shift position sensor.
3. Replace the gear shift position sensor if it is found to be faulty.
4. Reconnect the battery and clear the DTC using an OBD-II scanner.
5. Perform a road test to verify that the issue has been resolved.
6. If the code reappears, further diagnose the transmission control module and other related components.

How to erase DTC C1134

To erase DTC C1134 from the vehicle’s memory, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.