C1145 – OBD-II DTC

OBD-II DTC C1145 – Speed Wheel Sensor RF Input Circuit Failure

DTC C1145 meaning

DTC C1145 refers to a diagnostic trouble code indicating a failure in the right front speed wheel sensor input circuit. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle components to ensure proper functionality. The speed wheel sensor is crucial for providing accurate wheel speed data to the vehicle’s anti-lock braking system (ABS) and traction control system (TCS).

DTC C1145 symptoms

Common symptoms associated with DTC C1145 may include:

• Illumination of the ABS warning light on the dashboard
• Loss of ABS functionality
• Increased stopping distances
• Unusual behavior of the traction control system
• Erratic speedometer readings

DTC C1145 causes

Several factors can lead to the occurrence of DTC C1145, including:

• Faulty right front speed wheel sensor
• Damaged wiring or connectors in the sensor circuit
• Corrosion or poor connections at the sensor or module
• Issues with the ABS control module
• Mechanical problems such as a damaged wheel bearing

DTC C1145 seriousness

DTC C1145 is considered a serious issue as it affects the vehicle’s braking system. The ABS and traction control systems rely on accurate wheel speed data to function correctly. If these systems are compromised, it can lead to decreased vehicle stability and increased risk of accidents, especially in slippery conditions.

How to diagnose DTC C1145

To diagnose DTC C1145, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the C1145 code.
2. Inspect the right front speed wheel sensor for physical damage or disconnection.
3. Check the wiring and connectors for signs of wear, corrosion, or damage.
4. Test the sensor’s resistance and output voltage according to manufacturer specifications.
5. Examine the ABS control module for any additional codes or faults.
6. Perform a road test to observe the behavior of the ABS and traction control systems.

How to fix DTC C1145 step-by-step instructions

To fix DTC C1145, follow these steps:

1. Identify and replace the faulty right front speed wheel sensor if necessary.
2. Repair or replace any damaged wiring or connectors in the sensor circuit.
3. Clean any corrosion from connectors and ensure secure connections.
4. Test the ABS control module for proper operation and replace if faulty.
5. Clear the DTC using an OBD-II scanner and perform a road test to verify the fix.

How to erase DTC C1145

To erase DTC C1145, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the scanner’s menu and select the option to clear or erase trouble codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.