C1148 – OBD-II DTC

OBD-II DTC C1148 – Speed Wheel Sensor RF Coherency Fault

DTC C1148 meaning

DTC C1148 refers to a “Speed Wheel Sensor RF Coherency Fault.” This diagnostic trouble code indicates that there is a problem with the right front wheel speed sensor’s signal coherence. The vehicle’s onboard diagnostic system has detected that the readings from the right front wheel speed sensor are inconsistent or not matching with the expected values from other wheel speed sensors.

DTC C1148 symptoms

Common symptoms associated with DTC C1148 may include:

• Illumination of the ABS warning light on the dashboard
• Inconsistent or erratic ABS operation
• Loss of traction control functionality
• Unusual braking behavior, such as locking up or skidding
• Potential activation of the traction control light

DTC C1148 causes

Several factors can lead to the occurrence of DTC C1148, including:

• Faulty right front wheel speed sensor
• Damaged wiring or connectors related to the wheel speed sensor
• Corrosion or dirt buildup on the sensor or its connector
• Issues with the ABS control module
• Mechanical problems with the wheel assembly, such as bearing issues

DTC C1148 seriousness

DTC C1148 is considered a moderate to serious issue. While the vehicle may still be operable, the malfunctioning ABS and traction control systems can compromise safety, especially in slippery conditions. It is advisable to address this code promptly to ensure optimal vehicle performance and safety.

How to diagnose DTC C1148

To diagnose DTC C1148, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the C1148 code.
2. Inspect the right front wheel speed sensor and its wiring for any visible damage or disconnections.
3. Check the sensor’s resistance and voltage output using a multimeter.
4. Examine the ABS control module for any additional codes or faults.
5. Test the vehicle’s wheel speed sensors for coherence by comparing readings from all four sensors while the vehicle is in motion.

How to fix DTC C1148 step-by-step instructions

To fix DTC C1148, follow these steps:

1. Clear the DTC using an OBD-II scanner.
2. Inspect and repair any damaged wiring or connectors related to the right front wheel speed sensor.
3. If the sensor is faulty, replace the right front wheel speed sensor with a new one.
4. Ensure that the sensor is properly aligned and secured in place.
5. Recheck the system by performing a road test to confirm that the ABS and traction control systems are functioning correctly.

How to erase DTC C1148

To erase DTC C1148, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Access the diagnostic menu and select the option to clear or erase trouble codes.
3. Confirm the action to erase the codes.
4. Disconnect the scanner and start the vehicle to check if the code reappears.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.