C1150 – OBD-II DTC

OBD-II DTC C1150 – Two Speed Rear Axle Input Switch Circuit Short to Vbatt

DTC C1150 meaning

DTC C1150 refers to a diagnostic trouble code indicating a short circuit in the Two Speed Rear Axle Input Switch Circuit to battery voltage (Vbatt). This code is typically associated with vehicles equipped with a two-speed rear axle system, which allows for different gear ratios to optimize performance and efficiency. The input switch monitors the position of the axle and sends signals to the vehicle’s control module. A short to Vbatt suggests that the circuit is receiving constant voltage, which can lead to incorrect readings and affect vehicle performance.

DTC C1150 symptoms

Common symptoms associated with DTC C1150 may include:

• Illuminated check engine light
• Inconsistent or erratic operation of the two-speed rear axle
• Reduced vehicle performance or handling
• Possible engagement issues with the rear axle
• Diagnostic scanner may show the C1150 code

DTC C1150 causes

Several factors can lead to the occurrence of DTC C1150, including:

• Faulty Two Speed Rear Axle Input Switch
• Wiring issues such as shorts or damaged insulation
• Corrosion or poor connections in the circuit
• Faulty control module or software issues
• Electrical interference from other components

DTC C1150 seriousness

DTC C1150 can be considered serious as it may affect the functionality of the two-speed rear axle system. If left unaddressed, it can lead to:

• Decreased vehicle performance
• Increased wear on drivetrain components
• Potential safety hazards due to handling issues
• Further electrical problems if the short circuit persists

How to diagnose DTC C1150

To diagnose DTC C1150, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the C1150 code.
2. Inspect the Two Speed Rear Axle Input Switch for visible damage or wear.
3. Check the wiring and connectors for signs of shorts, corrosion, or loose connections.
4. Test the input switch with a multimeter to ensure it operates within specifications.
5. Examine the vehicle’s control module for any software updates or faults.
6. Clear the code and perform a road test to see if the code returns.

How to fix DTC C1150 step-by-step instructions

To fix DTC C1150, follow these steps:

1. Disconnect the vehicle’s battery to ensure safety while working on electrical components.
2. Inspect and repair any damaged wiring or connectors related to the Two Speed Rear Axle Input Switch.
3. Replace the Two Speed Rear Axle Input Switch if it is found to be faulty.
4. Reconnect the battery and clear the DTC using an OBD-II scanner.
5. Perform a road test to verify that the issue has been resolved and the code does not return.

How to erase DTC C1150

To erase DTC C1150, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Navigate to the ‘Erase Codes’ or ‘Clear DTCs’ option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to ensure the check engine light is off.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.