OBD-II DTC C1199 – ABS Inlet Valve Coil LF Circuit Open
DTC C1199 meaning
DTC C1199 refers to a diagnostic trouble code indicating an issue with the ABS (Anti-lock Braking System) inlet valve coil for the left front wheel. Specifically, it signifies that the circuit for the inlet valve coil is open, meaning there is a break in the electrical connection that prevents the coil from functioning properly.
DTC C1199 symptoms
Common symptoms associated with DTC C1199 may include:
- Illuminated ABS warning light on the dashboard
- Loss of ABS functionality
- Increased stopping distances
- Unusual brake pedal feel or behavior
DTC C1199 causes
Several factors can lead to the occurrence of DTC C1199, including:
- Faulty inlet valve coil
- Damaged wiring or connectors in the ABS system
- Corrosion or poor connections at the valve coil terminals
- Malfunctioning ABS control module
DTC C1199 seriousness
DTC C1199 is considered a serious issue as it directly affects the vehicle’s braking system. The ABS is crucial for maintaining control during hard braking situations, and a malfunction can lead to increased risk of skidding or loss of control, especially in adverse weather conditions.
How to diagnose DTC C1199
To diagnose DTC C1199, follow these steps:
- Use an OBD-II scanner to confirm the presence of the C1199 code.
- Inspect the ABS inlet valve coil and its wiring for visible damage or disconnections.
- Check the resistance of the inlet valve coil to ensure it is within specifications.
- Test the ABS control module for proper operation.
- Look for any additional DTCs that may provide further insight into the issue.
How to fix DTC C1199 step-by-step instructions
To fix DTC C1199, follow these steps:
- Disconnect the vehicle’s battery to ensure safety.
- Inspect the wiring and connectors for the left front inlet valve coil.
- Repair or replace any damaged wiring or connectors.
- Test the inlet valve coil for proper resistance and replace it if necessary.
- Reconnect the battery and clear the DTC using an OBD-II scanner.
- Perform a test drive to ensure the ABS system is functioning correctly and the code does not return.
How to erase DTC C1199
To erase DTC C1199, follow these steps:
- Connect an OBD-II scanner to the vehicle’s diagnostic port.
- Turn on the ignition without starting the engine.
- Navigate to the option to clear or erase trouble codes on the scanner.
- Confirm the action to erase the DTC.
- Disconnect the scanner and turn off the ignition.
- Start the vehicle and check if the ABS warning light remains off.