C1205 – OBD-II DTC

OBD-II DTC C1205 – ABS Outlet Valve Coil Rear Circuit Short To Ground

DTC C1205 meaning

DTC C1205 refers to a diagnostic trouble code indicating a short circuit to ground in the ABS outlet valve coil for the rear circuit. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle systems, including the Anti-lock Braking System (ABS). When the ABS control module detects an abnormal voltage level in the rear outlet valve coil circuit, it triggers this code to alert the technician of a potential issue.

DTC C1205 symptoms

Common symptoms associated with DTC C1205 may include:

• Illumination of the ABS warning light on the dashboard
• Loss of ABS functionality, leading to potential wheel lock-up during braking
• Increased stopping distances
• Unusual noises from the ABS module or valves

DTC C1205 causes

Several factors can lead to the triggering of DTC C1205, including:

• Damaged or frayed wiring in the ABS outlet valve circuit
• Corroded connectors or terminals in the ABS system
• Faulty ABS outlet valve coil
• Short circuit due to moisture or debris in the electrical connections
• Issues with the ABS control module itself

DTC C1205 seriousness

DTC C1205 is considered a serious issue as it directly affects the vehicle’s braking system. The loss of ABS functionality can lead to decreased vehicle control, especially in slippery conditions, increasing the risk of accidents. It is crucial to address this code promptly to ensure safe vehicle operation.

How to diagnose DTC C1205

To diagnose DTC C1205, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC C1205.
2. Inspect the wiring and connectors related to the ABS outlet valve coil for any visible damage or corrosion.
3. Check the resistance of the ABS outlet valve coil to ensure it is within manufacturer specifications.
4. Test for continuity in the wiring harness to identify any shorts to ground.
5. Examine the ABS control module for any faults or error codes.

How to fix DTC C1205 step-by-step instructions

To fix DTC C1205, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the electrical system.
2. Inspect and repair any damaged wiring or connectors in the ABS outlet valve circuit.
3. If the ABS outlet valve coil is faulty, replace it with a new component.
4. Ensure all connections are clean and secure, free from corrosion.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Test drive the vehicle to ensure the ABS system is functioning correctly and the DTC does not reappear.

How to erase DTC C1205

To erase DTC C1205, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes from the vehicle’s memory.
5. Disconnect the scanner and start the vehicle to verify that the code has been cleared.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.