C1206 – OBD-II DTC

OBD-II DTC C1206 – ABS Inlet Valve Coil Rear Circuit Failure

DTC C1206 meaning

DTC C1206 refers to a fault in the ABS (Anti-lock Braking System) related to the inlet valve coil in the rear circuit. This code indicates that the vehicle’s onboard diagnostic system has detected a malfunction in the electrical circuit that controls the inlet valve coil, which is responsible for regulating brake fluid pressure during ABS operation. When this circuit fails, it can lead to improper functioning of the ABS system, affecting vehicle safety and braking performance.

DTC C1206 symptoms

Common symptoms associated with DTC C1206 may include:

• Illumination of the ABS warning light on the dashboard
• Inconsistent or unresponsive ABS operation
• Increased stopping distances during braking
• Potential activation of the traction control system warning light
• Brake pedal pulsation or unusual behavior during braking

DTC C1206 causes

Several factors can contribute to the occurrence of DTC C1206, including:

• Faulty inlet valve coil in the rear circuit
• Damaged or corroded wiring or connectors in the ABS system
• Short circuits or open circuits in the electrical system
• Malfunctioning ABS control module
• Issues with the vehicle’s battery or charging system

DTC C1206 seriousness

DTC C1206 is considered a serious issue as it directly impacts the functionality of the ABS system. If the ABS is not functioning correctly, it can lead to reduced braking efficiency, especially in emergency situations or on slippery surfaces. This can increase the risk of accidents, making it crucial to address this code promptly to ensure vehicle safety.

How to diagnose DTC C1206

To diagnose DTC C1206, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the C1206 code.
2. Inspect the ABS system wiring and connectors for any visible damage or corrosion.
3. Check the inlet valve coil for continuity and proper resistance using a multimeter.
4. Test the ABS control module for any additional fault codes that may provide more context.
5. Perform a functional test of the ABS system to observe its operation.

How to fix DTC C1206 step-by-step instructions

To fix DTC C1206, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the electrical system.
2. Inspect and repair any damaged wiring or connectors related to the ABS inlet valve coil.
3. Replace the inlet valve coil if it is found to be faulty or out of specification.
4. Reconnect the battery and clear the DTC using an OBD-II scanner.
5. Perform a test drive to ensure the ABS system is functioning correctly and that the C1206 code does not reappear.

How to erase DTC C1206

To erase DTC C1206 from the vehicle’s memory, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the codes.
5. Disconnect the scanner and start the vehicle to verify that the code has been erased and does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.