C1208 – OBD-II DTC

OBD-II DTC C1208 – ABS Inlet Valve Coil Rear Circuit Short To Battery

DTC C1208 meaning

DTC C1208 refers to a diagnostic trouble code related to the Anti-lock Braking System (ABS). Specifically, it indicates a short circuit in the rear inlet valve coil circuit, which is causing the circuit to be shorted to the battery voltage. This can lead to improper functioning of the ABS system, affecting vehicle safety and braking performance.

DTC C1208 symptoms

Common symptoms associated with DTC C1208 may include:

• Illumination of the ABS warning light on the dashboard
• Loss of ABS functionality
• Increased stopping distances
• Unusual noises from the ABS module
• Potential activation of the traction control system warning light

DTC C1208 causes

Several factors can lead to the occurrence of DTC C1208, including:

• Wiring issues such as frayed or damaged wires
• Corrosion or poor connections in the ABS inlet valve circuit
• Faulty ABS inlet valve coil
• Short circuits due to moisture or debris
• Malfunctioning ABS control module

DTC C1208 seriousness

DTC C1208 is considered serious because it directly impacts the vehicle’s braking system. The ABS is crucial for maintaining control during hard braking and preventing wheel lockup. If left unaddressed, this issue can lead to compromised braking performance, increasing the risk of accidents.

How to diagnose DTC C1208

To diagnose DTC C1208, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC C1208.
2. Inspect the wiring and connectors related to the ABS inlet valve for any visible damage or corrosion.
3. Check the resistance of the ABS inlet valve coil to ensure it is within manufacturer specifications.
4. Test for continuity in the wiring harness to identify any shorts or breaks.
5. Examine the ABS control module for any faults or error codes.

How to fix DTC C1208 step-by-step instructions

To fix DTC C1208, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the electrical system.
2. Inspect and repair any damaged wiring or connectors in the ABS inlet valve circuit.
3. Replace the ABS inlet valve coil if it is found to be faulty.
4. Clean any corrosion from connectors and ensure all connections are secure.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Test drive the vehicle to ensure the ABS system is functioning correctly and the DTC does not reappear.

How to erase DTC C1208

To erase DTC C1208, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the trouble codes section on the scanner.
4. Select the option to clear or erase the codes.
5. Confirm the action and wait for the scanner to indicate that the codes have been cleared.
6. Disconnect the scanner and perform a test drive to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.