C1210 – OBD-II DTC

OBD-II DTC C1210 – ABS Outlet Valve Coil RF Circuit Failure

DTC C1210 meaning

DTC C1210 refers to a fault in the Anti-lock Braking System (ABS) related to the outlet valve coil in the right front circuit. This code indicates that the vehicle’s onboard diagnostic system has detected a malfunction in the electrical circuit that controls the outlet valve coil, which is crucial for the proper functioning of the ABS. The outlet valve coil is responsible for regulating brake fluid flow to the brake calipers, ensuring optimal braking performance and preventing wheel lock-up during hard braking situations.

DTC C1210 symptoms

Common symptoms associated with DTC C1210 may include:

• Illumination of the ABS warning light on the dashboard
• Increased stopping distances
• Loss of ABS functionality
• Unusual brake pedal feel, such as pulsation or stiffness
• Potential activation of the traction control or stability control systems

DTC C1210 causes

Several factors can lead to the occurrence of DTC C1210, including:

• Faulty outlet valve coil in the right front brake assembly
• Wiring issues, such as frayed or damaged wires in the ABS circuit
• Corrosion or poor connections at the electrical connectors
• Malfunctioning ABS control module
• Low brake fluid levels or contamination in the brake fluid

DTC C1210 seriousness

DTC C1210 is considered a serious issue as it directly affects the vehicle’s braking system. The ABS is designed to enhance vehicle control during emergency braking situations, and a malfunction can lead to reduced braking efficiency and increased risk of accidents. It is crucial to address this code promptly to ensure safe vehicle operation.

How to diagnose DTC C1210

To diagnose DTC C1210, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the C1210 code.
2. Inspect the ABS wiring and connectors for any visible damage or corrosion.
3. Check the brake fluid level and condition, ensuring it is clean and at the proper level.
4. Test the outlet valve coil for continuity and proper operation using a multimeter.
5. Examine the ABS control module for any faults or error codes.
6. Clear the DTC and perform a road test to see if the code reappears.

How to fix DTC C1210 step-by-step instructions

To fix DTC C1210, follow these steps:

1. Inspect and repair any damaged wiring or connectors in the ABS circuit.
2. Replace the outlet valve coil if it is found to be faulty.
3. Ensure all electrical connections are clean and secure.
4. Check and top off the brake fluid if necessary, replacing it if contaminated.
5. Test the ABS control module for proper functionality and replace if needed.
6. Clear the DTC using an OBD-II scanner and perform a road test to confirm the issue is resolved.

How to erase DTC C1210

To erase DTC C1210, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the diagnostic menu on the scanner and select the option to clear or erase trouble codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.