C1224 – OBD-II DTC

OBD-II DTC C1224 – Lamp Brake Warning Output Circuit Open

DTC C1224 meaning

DTC C1224 refers to a diagnostic trouble code indicating an open circuit in the Lamp Brake Warning Output. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle systems for faults. The specific issue arises when the brake warning lamp circuit is not functioning correctly, leading to a failure in signaling the driver about potential brake system issues.

DTC C1224 symptoms

Common symptoms associated with DTC C1224 may include:

• Illumination of the brake warning light on the dashboard
• Inconsistent or non-functional brake warning lamp
• Possible issues with the anti-lock braking system (ABS)
• Increased stopping distances or brake performance issues

DTC C1224 causes

Several factors can lead to the occurrence of DTC C1224, including:

• Open or damaged wiring in the brake warning lamp circuit
• Faulty brake warning lamp bulb
• Defective brake switch or sensor
• Issues with the ABS control module
• Corrosion or poor connections in the circuit

DTC C1224 seriousness

DTC C1224 is considered a moderate to serious issue. While it may not immediately affect the vehicle’s drivability, it can lead to critical safety concerns. The inability to receive proper warnings about brake system malfunctions can result in reduced braking performance, increasing the risk of accidents.

How to diagnose DTC C1224

To diagnose DTC C1224, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the C1224 code.
2. Inspect the brake warning lamp circuit for visible damage or disconnections.
3. Check the brake warning lamp bulb for functionality.
4. Test the brake switch and associated wiring for proper operation.
5. Examine the ABS control module for faults or error codes.
6. Perform continuity tests on the wiring to ensure there are no open circuits.

How to fix DTC C1224 step-by-step instructions

To fix DTC C1224, follow these step-by-step instructions:

1. Confirm the DTC C1224 using an OBD-II scanner.
2. Visually inspect the brake warning lamp circuit for any signs of damage.
3. Replace the brake warning lamp bulb if it is found to be faulty.
4. Test and replace the brake switch if it is not functioning correctly.
5. Repair or replace any damaged wiring or connectors in the circuit.
6. Clear the DTC using the OBD-II scanner and perform a test drive to ensure the issue is resolved.

How to erase DTC C1224

To erase DTC C1224, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the scanner’s menu and select the option to clear or erase trouble codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.