C1256 – OBD-II DTC

OBD-II DTC C1256 – ABS Inlet Valve Coil RR Circuit Short To Battery

DTC C1256 meaning

DTC C1256 refers to a diagnostic trouble code indicating a problem with the ABS (Anti-lock Braking System) inlet valve coil for the right rear wheel. Specifically, it signifies a short circuit in the inlet valve coil circuit that is connected directly to the battery. This issue can affect the proper functioning of the ABS system, which is crucial for maintaining vehicle stability during braking.

DTC C1256 symptoms

Common symptoms associated with DTC C1256 may include:

• Illumination of the ABS warning light on the dashboard
• Loss of ABS functionality, leading to potential wheel lock-up during hard braking
• Increased stopping distances
• Unusual noises from the ABS module or pump

DTC C1256 causes

Several factors can lead to the occurrence of DTC C1256, including:

• Damaged or frayed wiring in the inlet valve coil circuit
• Corrosion or poor connections at the electrical terminals
• Faulty ABS inlet valve coil itself
• Issues with the ABS control module

DTC C1256 seriousness

DTC C1256 is considered a serious issue as it directly impacts the vehicle’s braking system. The ABS is designed to prevent wheel lock-up during braking, which enhances vehicle control. If this system is compromised, it can lead to dangerous driving conditions, especially in emergency braking situations. Therefore, it is crucial to address this code promptly.

How to diagnose DTC C1256

To diagnose DTC C1256, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the C1256 code.
2. Inspect the wiring and connectors related to the right rear ABS inlet valve coil for any visible damage or corrosion.
3. Test the resistance of the inlet valve coil using a multimeter to ensure it is within the manufacturer’s specifications.
4. Check the ABS control module for any additional codes or faults that may be related.
5. Perform a continuity test on the wiring harness to ensure there are no breaks or shorts.

How to fix DTC C1256 step-by-step instructions

To fix DTC C1256, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the electrical system.
2. Inspect and repair any damaged wiring or connectors found during the diagnosis.
3. If the inlet valve coil is faulty, replace it with a new one that meets OEM specifications.
4. Reconnect all electrical connections securely and ensure there is no corrosion.
5. Reconnect the vehicle’s battery.
6. Clear the DTC using an OBD-II scanner and perform a test drive to verify that the ABS system is functioning correctly.

How to erase DTC C1256

To erase DTC C1256, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.