C1272 – OBD-II DTC

OBD-II DTC C1272 – Motor # 2 Input Circuit Failure

DTC C1272 meaning

DTC C1272 refers to a diagnostic trouble code indicating a failure in the input circuit for Motor #2. This code is typically associated with the vehicle’s stability control system or traction control system, which relies on various sensors and motors to function correctly. When the input circuit for Motor #2 fails, it can lead to issues with the vehicle’s handling and stability features.

DTC C1272 symptoms

Common symptoms associated with DTC C1272 may include:

• Illumination of the check engine light or stability control warning light
• Reduced effectiveness of traction control or stability control systems
• Unusual vehicle handling or stability issues
• Possible activation of limp mode, limiting engine power

DTC C1272 causes

Several factors can lead to the occurrence of DTC C1272, including:

• Faulty Motor #2
• Wiring issues, such as shorts, opens, or corrosion in the input circuit
• Defective connectors or poor connections in the circuit
• Malfunctioning control module that processes the input from Motor #2

DTC C1272 seriousness

DTC C1272 is considered a serious issue as it can affect the vehicle’s stability and handling. If left unaddressed, it may lead to compromised safety while driving, especially in adverse conditions. It is advisable to diagnose and repair the issue promptly to ensure the vehicle operates safely and effectively.

How to diagnose DTC C1272

To diagnose DTC C1272, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC C1272.
2. Inspect the wiring and connectors associated with Motor #2 for any visible damage or corrosion.
3. Check the resistance and continuity of the input circuit to ensure it is functioning correctly.
4. Test Motor #2 to verify its operation and ensure it is not faulty.
5. Examine the control module for any faults or software issues that may affect the input circuit.

How to fix DTC C1272 step-by-step instructions

To fix DTC C1272, follow these steps:

1. Repair or replace any damaged wiring or connectors in the input circuit.
2. If Motor #2 is found to be faulty, replace it with a new or functioning unit.
3. Ensure all connections are secure and free of corrosion.
4. Recheck the input circuit for proper resistance and continuity after repairs.
5. Clear the DTC using an OBD-II scanner and perform a test drive to confirm the issue is resolved.

How to erase DTC C1272

To erase DTC C1272, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Access the trouble codes menu on the scanner.
4. Select the option to clear or erase trouble codes.
5. Confirm the action and wait for the scanner to indicate that the codes have been cleared.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.