C1275 – OBD-II DTC

OBD-II DTC C1275 – Solenoid Relay # 1 Circuit Short to Vbatt

DTC C1275 meaning

DTC C1275 refers to a diagnostic trouble code indicating a short circuit in the Solenoid Relay #1 circuit to battery voltage (Vbatt). This code is typically associated with the vehicle’s traction control or stability control systems, which rely on solenoids to manage various functions. A short circuit can lead to improper operation of these systems, affecting vehicle performance and safety.

DTC C1275 symptoms

Common symptoms associated with DTC C1275 may include:

• Illumination of the check engine light or traction control warning light
• Loss of traction control or stability control functionality
• Unusual vehicle behavior during acceleration or cornering
• Potential activation of limp mode, limiting engine power

DTC C1275 causes

Several factors can lead to the occurrence of DTC C1275, including:

• Faulty solenoid relay #1
• Wiring issues, such as damaged or frayed wires
• Corrosion or poor connections in the electrical circuit
• Short circuits due to insulation failure or contact with other components
• Faulty powertrain control module (PCM) or electronic control unit (ECU)

DTC C1275 seriousness

DTC C1275 is considered a serious issue as it can affect the vehicle’s stability and traction control systems. If left unaddressed, it may lead to compromised vehicle handling, increasing the risk of accidents. It is advisable to diagnose and repair the issue promptly to ensure safe vehicle operation.

How to diagnose DTC C1275

To diagnose DTC C1275, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the C1275 code.
2. Inspect the wiring and connectors related to solenoid relay #1 for damage or corrosion.
3. Check the solenoid relay #1 for proper operation using a multimeter.
4. Test the circuit for continuity and shorts to battery voltage.
5. Examine the powertrain control module (PCM) for any faults or updates.

How to fix DTC C1275 step-by-step instructions

To fix DTC C1275, follow these step-by-step instructions:

1. Clear the DTC using an OBD-II scanner.
2. Inspect and repair any damaged wiring or connectors related to solenoid relay #1.
3. Replace solenoid relay #1 if it is found to be faulty.
4. Ensure all connections are clean and secure to prevent corrosion.
5. Recheck the circuit for shorts and ensure proper voltage is present.
6. Reconnect the battery and perform a test drive to verify the issue is resolved.

How to erase DTC C1275

To erase DTC C1275, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the scanner’s menu and select the option to clear or erase trouble codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.