C1282 – OBD-II DTC

OBD-II DTC C1282 – Lateral Accelerometer Signal Fault

DTC C1282 meaning

DTC C1282 refers to a fault in the lateral accelerometer signal, which is part of the vehicle’s stability control system. The lateral accelerometer measures the side-to-side acceleration of the vehicle, helping to determine how much the vehicle is leaning during turns. This information is crucial for systems like Electronic Stability Control (ESC) and Traction Control, which enhance vehicle stability and safety.

DTC C1282 symptoms

Common symptoms associated with DTC C1282 may include:

• Illumination of the check engine light or stability control warning light.
• Unusual handling characteristics, such as excessive body roll or difficulty maintaining traction.
• Inconsistent performance of the stability control system.
• Potential activation of the anti-lock braking system (ABS) warning light.

DTC C1282 causes

Several factors can lead to the occurrence of DTC C1282, including:

• Faulty lateral accelerometer sensor.
• Wiring issues, such as damaged or corroded connectors.
• Software glitches in the vehicle’s control module.
• Improper installation or calibration of the accelerometer.
• Physical damage to the sensor due to accidents or impacts.

DTC C1282 seriousness

DTC C1282 is considered a moderate to serious issue. While the vehicle may still be operable, the malfunction of the lateral accelerometer can compromise the effectiveness of stability control systems, increasing the risk of loss of control during adverse driving conditions. It is advisable to address this issue promptly to ensure optimal vehicle safety.

How to diagnose DTC C1282

To diagnose DTC C1282, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC C1282.
2. Inspect the lateral accelerometer sensor and its wiring for visible damage or disconnections.
3. Check for any additional DTCs that may provide more context to the issue.
4. Test the lateral accelerometer using a multimeter to ensure it is functioning within specifications.
5. Review the vehicle’s service history for any previous repairs related to the stability control system.

How to fix DTC C1282 step-by-step instructions

To fix DTC C1282, follow these step-by-step instructions:

1. Clear the DTC using an OBD-II scanner and take the vehicle for a test drive to see if the code returns.
2. If the code reappears, inspect the lateral accelerometer sensor and wiring for any signs of damage.
3. Replace the lateral accelerometer sensor if it is found to be faulty.
4. Repair or replace any damaged wiring or connectors associated with the sensor.
5. Recalibrate the stability control system if necessary, following the manufacturer’s guidelines.
6. Clear the DTC again and perform a test drive to ensure the issue is resolved.

How to erase DTC C1282

To erase DTC C1282, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to ensure the check engine light is off.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.