C1402 – OBD-II DTC

OBD-II DTC C1402 – Traction Control Valve RF Circuit Short To Ground

DTC C1402 meaning

DTC C1402 refers to a diagnostic trouble code indicating a short circuit to ground in the traction control valve right front (RF) circuit. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle systems for faults. The traction control system is crucial for maintaining vehicle stability and preventing wheel spin during acceleration.

DTC C1402 symptoms

Common symptoms associated with DTC C1402 may include:

• Illumination of the traction control warning light on the dashboard
• Reduced traction control functionality
• Increased wheel spin during acceleration
• Potential activation of the anti-lock braking system (ABS) warning light
• Unusual noises from the traction control system components

DTC C1402 causes

Several factors can lead to the occurrence of DTC C1402, including:

• Damaged wiring or connectors in the traction control valve circuit
• Corrosion or poor connections at the electrical terminals
• Faulty traction control valve or actuator
• Issues with the vehicle’s control module
• Short circuits caused by aftermarket modifications or repairs

DTC C1402 seriousness

DTC C1402 is considered a serious issue as it directly affects the vehicle’s traction control system. If left unaddressed, it can lead to:

• Decreased vehicle stability, especially in slippery conditions
• Increased risk of accidents due to loss of traction
• Potential damage to other components of the traction control or braking system

How to diagnose DTC C1402

To diagnose DTC C1402, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the C1402 code.
2. Inspect the wiring and connectors related to the traction control valve for damage or corrosion.
3. Check for any additional trouble codes that may provide more context.
4. Test the traction control valve for proper operation using a multimeter.
5. Examine the vehicle’s control module for faults or software issues.

How to fix DTC C1402 step-by-step instructions

To fix DTC C1402, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on electrical components.
2. Inspect and repair any damaged wiring or connectors in the traction control valve circuit.
3. Clean any corrosion from electrical terminals and ensure secure connections.
4. Test the traction control valve and replace it if it is found to be faulty.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Perform a test drive to ensure the traction control system is functioning correctly and the code does not reappear.

How to erase DTC C1402

To erase DTC C1402, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Navigate to the trouble codes section on the scanner.
4. Select the option to clear or erase the codes.
5. Confirm the action and wait for the scanner to indicate that the codes have been cleared.
6. Disconnect the scanner and perform a test drive to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.