C1404 – OBD-II DTC

OBD-II DTC C1404 – Traction Control Valve Rear Circuit Failure

DTC C1404 meaning

DTC C1404 refers to a Traction Control Valve Rear Circuit Failure. This diagnostic trouble code indicates that there is a malfunction in the rear traction control valve circuit, which is part of the vehicle’s traction control system. The traction control system helps maintain vehicle stability by preventing wheel spin during acceleration. When this code is triggered, it suggests that the system is unable to properly control the rear wheels, potentially affecting vehicle performance and safety.

DTC C1404 symptoms

Common symptoms associated with DTC C1404 may include:

• Illumination of the traction control warning light on the dashboard
• Reduced traction control functionality
• Increased wheel spin during acceleration
• Unusual noises from the rear brakes or traction control system
• Possible activation of the ABS warning light

DTC C1404 causes

Several factors can lead to the triggering of DTC C1404, including:

• Faulty traction control valve
• Wiring issues, such as damaged or corroded connectors
• Short circuits or open circuits in the rear traction control valve circuit
• Malfunctioning ABS control module
• Software issues within the vehicle’s control systems

DTC C1404 seriousness

DTC C1404 is considered a serious issue as it directly impacts the vehicle’s traction control system. If left unaddressed, it can lead to:

• Decreased vehicle stability and control
• Increased risk of skidding or loss of control, especially in slippery conditions
• Potential for further damage to the traction control system or related components

It is advisable to diagnose and repair this issue promptly to ensure safe vehicle operation.

How to diagnose DTC C1404

To diagnose DTC C1404, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC C1404.
2. Inspect the wiring and connectors related to the rear traction control valve for any visible damage or corrosion.
3. Check the functionality of the traction control valve using a multimeter to test for proper voltage and resistance.
4. Examine the ABS control module for any faults or software issues.
5. Clear the DTC and perform a test drive to see if the code reappears.

How to fix DTC C1404 step-by-step instructions

To fix DTC C1404, follow these step-by-step instructions:

1. Start by inspecting the wiring and connectors for the rear traction control valve. Repair or replace any damaged components.
2. If the wiring is intact, test the traction control valve for proper operation. Replace it if it is found to be faulty.
3. Check the ABS control module for any software updates or faults. Update or replace the module if necessary.
4. After repairs, reconnect all components and ensure everything is secure.
5. Clear the DTC using an OBD-II scanner and perform a test drive to verify that the issue has been resolved.

How to erase DTC C1404

To erase DTC C1404, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Access the scanner’s menu and select the option to clear or erase trouble codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.