C1412 – OBD-II DTC

OBD-II DTC C1412 – Traction Control Valve LF Circuit Short To Ground

DTC C1412 meaning

DTC C1412 refers to a diagnostic trouble code indicating a short circuit to ground in the left front traction control valve circuit. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle components to ensure proper functionality. The traction control system (TCS) helps maintain vehicle stability by preventing wheel spin during acceleration.

DTC C1412 symptoms

Common symptoms associated with DTC C1412 may include:

• Illumination of the traction control warning light on the dashboard
• Reduced traction control functionality
• Increased wheel slip during acceleration
• Potential activation of the anti-lock braking system (ABS) warning light
• Unusual noises from the traction control system components

DTC C1412 causes

Several factors can lead to the occurrence of DTC C1412, including:

• Damaged wiring or connectors in the traction control valve circuit
• Faulty traction control valve
• Corrosion or poor connections in the electrical system
• Short circuits caused by exposed wires
• Issues with the vehicle’s control module

DTC C1412 seriousness

DTC C1412 is considered a serious issue as it directly affects the vehicle’s traction control system. If left unaddressed, it can lead to:

• Decreased vehicle stability and control
• Increased risk of skidding or loss of control, especially in slippery conditions
• Potential safety hazards for the driver and passengers

How to diagnose DTC C1412

To diagnose DTC C1412, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC C1412.
2. Inspect the wiring and connectors related to the left front traction control valve for damage or corrosion.
3. Check for continuity in the circuit to ensure there are no breaks.
4. Test the traction control valve for proper operation.
5. Examine the vehicle’s control module for any faults or software issues.

How to fix DTC C1412 step-by-step instructions

To fix DTC C1412, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the electrical system.
2. Inspect and repair any damaged wiring or connectors in the traction control valve circuit.
3. Replace the traction control valve if it is found to be faulty.
4. Clean any corrosion from connectors and ensure all connections are secure.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Test drive the vehicle to ensure the traction control system is functioning properly and the DTC does not reappear.

How to erase DTC C1412

To erase DTC C1412, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.