C1416 – OBD-II DTC

OBD-II DTC C1416 – Damper RF Circuit Short To Battery

DTC C1416 meaning

DTC C1416 refers to a diagnostic trouble code indicating a short circuit in the damper RF (Right Front) circuit to the battery. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle components and systems for faults. The damper RF circuit is responsible for controlling the operation of the right front damper, which is crucial for maintaining vehicle stability and ride comfort.

DTC C1416 symptoms

When DTC C1416 is triggered, the following symptoms may be observed:

• Warning lights on the dashboard, such as the ABS or traction control light.
• Inconsistent or poor ride quality.
• Unusual noises from the suspension system.
• Potential loss of stability control features.

DTC C1416 causes

Several factors can lead to the occurrence of DTC C1416, including:

• A short circuit in the wiring harness connected to the damper RF.
• Faulty damper RF sensor or actuator.
• Corroded or damaged connectors in the circuit.
• Issues with the vehicle’s control module.

DTC C1416 seriousness

DTC C1416 is considered a serious issue as it can affect the vehicle’s handling and stability. If left unaddressed, it may lead to further damage to the suspension system or compromise safety features, increasing the risk of accidents. It is advisable to diagnose and repair this code promptly.

How to diagnose DTC C1416

To diagnose DTC C1416, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the C1416 code.
2. Inspect the wiring and connectors associated with the damper RF circuit for any visible damage or corrosion.
3. Check the resistance and voltage of the damper RF sensor and actuator.
4. Test the vehicle’s control module for any faults or communication issues.
5. Clear the code and perform a road test to see if the code reappears.

How to fix DTC C1416 step-by-step instructions

To fix DTC C1416, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the electrical system.
2. Inspect and repair any damaged wiring or connectors in the damper RF circuit.
3. Replace the damper RF sensor or actuator if they are found to be faulty.
4. Reconnect the battery and clear the DTC using an OBD-II scanner.
5. Perform a road test to verify that the issue has been resolved and the code does not return.

How to erase DTC C1416

To erase DTC C1416, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the option to clear or erase trouble codes on the scanner.
4. Confirm the action to erase the DTC.
5. Disconnect the scanner and perform a test drive to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.