C1417 – OBD-II DTC

OBD-II DTC C1417 – Damper RF Circuit Short to Ground

DTC C1417 meaning

DTC C1417 refers to a diagnostic trouble code indicating a short to ground in the right front damper circuit. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle components to ensure proper functionality. The damper is a crucial part of the vehicle’s suspension system, helping to control the movement of the vehicle’s body and providing a smoother ride.

DTC C1417 symptoms

When DTC C1417 is triggered, the following symptoms may be observed:

• Warning lights on the dashboard, such as the ABS or traction control light.
• Unusual noises from the suspension system.
• Decreased ride quality or handling issues.
• Increased wear on suspension components.

DTC C1417 causes

Several factors can lead to the activation of DTC C1417, including:

• Wiring issues, such as frayed or damaged wires in the damper circuit.
• Corrosion or poor connections at the electrical connectors.
• Faulty damper or suspension components.
• Moisture intrusion into the electrical system.

DTC C1417 seriousness

DTC C1417 is considered a serious issue as it can affect vehicle safety and handling. If left unaddressed, it may lead to further damage to the suspension system and compromise the vehicle’s stability, especially during braking or cornering. It is advisable to diagnose and repair the issue promptly.

How to diagnose DTC C1417

To diagnose DTC C1417, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the C1417 code.
2. Inspect the wiring and connectors associated with the right front damper for any visible damage or corrosion.
3. Check for continuity in the damper circuit using a multimeter.
4. Test the damper itself to ensure it is functioning correctly.
5. Clear the code and perform a road test to see if the code reappears.

How to fix DTC C1417 step-by-step instructions

To fix DTC C1417, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the electrical system.
2. Inspect and repair any damaged wiring or connectors in the right front damper circuit.
3. Replace any corroded connectors or terminals as necessary.
4. Test the right front damper for proper operation and replace it if faulty.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Perform a road test to verify that the issue has been resolved and the code does not return.

How to erase DTC C1417

To erase DTC C1417, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.