C1419 – OBD-II DTC

OBD-II DTC C1419 – Damper RF Circuit Open

DTC C1419 meaning

DTC C1419 refers to a diagnostic trouble code indicating an issue with the damper RF (Right Front) circuit being open. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle components to ensure proper functionality. An open circuit means that there is a break in the electrical connection, preventing the damper from receiving the necessary signals to operate correctly.

DTC C1419 symptoms

Common symptoms associated with DTC C1419 may include:

• Warning lights on the dashboard, such as the ABS or traction control light.
• Reduced effectiveness of the vehicle’s stability control system.
• Unusual noises from the suspension or steering components.
• Inconsistent handling or steering response.

DTC C1419 causes

Several factors can lead to the triggering of DTC C1419, including:

• Damaged or frayed wiring in the damper RF circuit.
• Faulty connectors or terminals that are corroded or loose.
• Malfunctioning damper RF sensor or actuator.
• Issues with the vehicle’s control module or software glitches.

DTC C1419 seriousness

The seriousness of DTC C1419 can vary based on the vehicle’s condition and the extent of the issue. It is generally considered a moderate concern because:

• It can affect vehicle stability and handling.
• It may lead to further damage if not addressed promptly.
• It can result in decreased safety while driving.

How to diagnose DTC C1419

To diagnose DTC C1419, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the C1419 code.
2. Inspect the wiring and connectors related to the damper RF circuit for any visible damage.
3. Check for continuity in the circuit using a multimeter.
4. Test the damper RF sensor and actuator for proper operation.
5. Examine the vehicle’s control module for any software updates or faults.

How to fix DTC C1419 step-by-step instructions

To fix DTC C1419, follow these steps:

1. Repair or replace any damaged wiring or connectors in the damper RF circuit.
2. Replace the faulty damper RF sensor or actuator if necessary.
3. Ensure all connections are secure and free of corrosion.
4. Reprogram or update the vehicle’s control module if required.
5. Clear the DTC using an OBD-II scanner and test drive the vehicle to ensure the issue is resolved.

How to erase DTC C1419

To erase DTC C1419, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to check if the code reappears.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.