C1425 – OBD-II DTC

OBD-II DTC C1425 – Damper RR Circuit Short to Ground

DTC C1425 meaning

DTC C1425 refers to a diagnostic trouble code indicating a short circuit to ground in the rear damper circuit of a vehicle’s suspension system. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle components for faults. The rear damper is crucial for maintaining ride quality and stability, and a short to ground can disrupt its function.

DTC C1425 symptoms

Common symptoms associated with DTC C1425 may include:

• Warning lights on the dashboard, such as the ABS or traction control light.
• Decreased ride quality or handling issues.
• Unusual noises from the suspension system.
• Increased body roll during turns.
• Potential loss of stability control features.

DTC C1425 causes

Several factors can lead to the occurrence of DTC C1425, including:

• Damaged wiring or connectors in the rear damper circuit.
• Faulty rear damper or actuator.
• Corrosion or moisture ingress in electrical connections.
• Improper installation of suspension components.
• Short circuits due to wear and tear or physical damage.

DTC C1425 seriousness

DTC C1425 is considered a serious issue as it can affect vehicle safety and performance. A malfunctioning rear damper can lead to poor handling, increased stopping distances, and a higher risk of losing control, especially in adverse driving conditions. It is essential to address this code promptly to ensure safe vehicle operation.

How to diagnose DTC C1425

To diagnose DTC C1425, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the C1425 code.
2. Inspect the wiring and connectors related to the rear damper for any visible damage or corrosion.
3. Check for continuity in the circuit to identify any breaks or shorts.
4. Test the rear damper and actuator for proper operation.
5. Clear the code and perform a road test to see if the code returns.

How to fix DTC C1425 step-by-step instructions

To fix DTC C1425, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on electrical components.
2. Inspect and repair any damaged wiring or connectors in the rear damper circuit.
3. Replace the rear damper or actuator if they are found to be faulty.
4. Reconnect all electrical connections securely and ensure they are free from corrosion.
5. Reconnect the battery and use an OBD-II scanner to clear the trouble code.
6. Perform a road test to verify that the issue has been resolved and the code does not return.

How to erase DTC C1425

To erase DTC C1425, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Navigate to the trouble codes section on the scanner.
4. Select the option to clear or erase the codes.
5. Confirm the action and wait for the scanner to indicate that the codes have been cleared.
6. Disconnect the scanner and perform a test drive to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.