C1437 – OBD-II DTC

OBD-II DTC C1437 – Accelerometer Rear Circuit Short To Ground

DTC C1437 meaning

DTC C1437 refers to a diagnostic trouble code indicating a problem with the rear accelerometer circuit in a vehicle. Specifically, it signifies a short to ground condition in the accelerometer circuit, which is responsible for measuring the vehicle’s acceleration and deceleration. This information is crucial for various systems, including stability control and traction control.

DTC C1437 symptoms

When DTC C1437 is triggered, the following symptoms may be observed:

• Illumination of the check engine light or warning indicator.
• Inconsistent or erratic vehicle handling.
• Decreased performance of stability control systems.
• Potential activation of traction control warning.
• Unusual behavior of the anti-lock braking system (ABS).

DTC C1437 causes

Several factors can lead to the occurrence of DTC C1437, including:

• Faulty rear accelerometer sensor.
• Wiring issues, such as frayed or damaged wires.
• Corrosion or poor connections in the electrical circuit.
• Short circuits in the wiring harness.
• Faulty vehicle control module (VCM) or electronic control unit (ECU).

DTC C1437 seriousness

DTC C1437 is considered a serious issue as it can affect the vehicle’s stability and handling. If left unaddressed, it may lead to compromised safety features, increasing the risk of accidents. It is advisable to diagnose and repair the issue promptly to ensure optimal vehicle performance and safety.

How to diagnose DTC C1437

To diagnose DTC C1437, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the C1437 code.
2. Inspect the wiring and connectors associated with the rear accelerometer for damage or corrosion.
3. Test the rear accelerometer sensor for proper operation using a multimeter.
4. Check for any additional trouble codes that may provide further insight into the issue.
5. Examine the vehicle control module for faults or software issues.

How to fix DTC C1437 step-by-step instructions

To fix DTC C1437, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the electrical system.
2. Inspect and repair any damaged wiring or connectors related to the rear accelerometer.
3. Replace the rear accelerometer sensor if it is found to be faulty.
4. Reconnect the battery and clear the DTC using an OBD-II scanner.
5. Test drive the vehicle to ensure the issue is resolved and the check engine light does not reappear.

How to erase DTC C1437

To erase DTC C1437, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the option to clear or erase trouble codes on the scanner.
4. Confirm the action to erase the DTC.
5. Disconnect the scanner and start the vehicle to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.