C1440 – OBD-II DTC

OBD-II DTC C1440 – Pressure Transducer Main / Primary signal Faulted

DTC C1440 meaning

DTC C1440 refers to a diagnostic trouble code indicating a fault in the pressure transducer’s main or primary signal. This code is typically associated with the vehicle’s braking system, specifically the anti-lock braking system (ABS) or traction control system. The pressure transducer is responsible for measuring brake fluid pressure and relaying this information to the vehicle’s control module. A fault in this signal can lead to improper brake function and reduced safety.

DTC C1440 symptoms

Common symptoms associated with DTC C1440 may include:

• Illumination of the ABS warning light on the dashboard
• Inconsistent or erratic braking performance
• Increased stopping distances
• Activation of the traction control warning light
• Potential loss of ABS functionality

DTC C1440 causes

Several factors can lead to the triggering of DTC C1440, including:

• Faulty pressure transducer
• Wiring issues, such as damaged or corroded connectors
• Short circuits or open circuits in the pressure transducer circuit
• Software issues within the vehicle’s control module
• Contaminated brake fluid affecting sensor performance

DTC C1440 seriousness

DTC C1440 is considered a serious issue as it directly impacts the vehicle’s braking system. If left unaddressed, it can lead to:

• Increased risk of brake failure
• Reduced vehicle control during braking
• Potential accidents due to compromised braking performance

It is crucial to diagnose and repair this issue promptly to ensure safe vehicle operation.

How to diagnose DTC C1440

To diagnose DTC C1440, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the C1440 code.
2. Inspect the pressure transducer and its wiring for visible damage or corrosion.
3. Check the electrical connections to ensure they are secure and free of debris.
4. Test the pressure transducer using a multimeter to verify its output voltage.
5. Examine the brake fluid for contamination or low levels.
6. Consult the vehicle’s service manual for specific testing procedures related to the ABS system.

How to fix DTC C1440 step-by-step instructions

To fix DTC C1440, follow these step-by-step instructions:

1. Clear the DTC using an OBD-II scanner.
2. Inspect and repair any damaged wiring or connectors related to the pressure transducer.
3. If the pressure transducer is faulty, replace it with a new one.
4. Ensure that the brake fluid is clean and at the proper level replace if necessary.
5. Recheck the system for any additional codes after repairs.
6. Test drive the vehicle to ensure that the ABS and traction control systems are functioning correctly.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.