C1443 – OBD-II DTC

OBD-II DTC C1443 – Steering Phase A Circuit Short To Ground

DTC C1443 meaning

DTC C1443 refers to a diagnostic trouble code indicating a short circuit to ground in the Steering Phase A circuit. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle systems for faults. The Steering Phase A circuit is crucial for the proper functioning of the vehicle’s steering system, particularly in vehicles equipped with electronic power steering (EPS). A short to ground in this circuit can disrupt the normal operation of the steering system, leading to potential safety issues.

DTC C1443 symptoms

Common symptoms associated with DTC C1443 may include:

• Steering wheel feels heavy or unresponsive
• Warning lights illuminated on the dashboard, such as the power steering warning light
• Difficulty in steering, especially at low speeds
• Intermittent loss of power steering assist
• Unusual noises from the steering column or power steering unit

DTC C1443 causes

Several factors can lead to the occurrence of DTC C1443, including:

• Damaged wiring or connectors in the Steering Phase A circuit
• Faulty power steering control module
• Short circuit due to moisture or corrosion in electrical components
• Defective steering angle sensor
• Issues with the vehicle’s battery or charging system

DTC C1443 seriousness

DTC C1443 is considered a serious issue as it directly affects the vehicle’s steering system. If left unaddressed, it can lead to:

• Loss of steering control, increasing the risk of accidents
• Increased wear on steering components
• Potential for complete power steering failure
• Increased driver fatigue due to heavy steering

How to diagnose DTC C1443

To diagnose DTC C1443, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC C1443.
2. Inspect the wiring and connectors in the Steering Phase A circuit for damage or corrosion.
3. Check the power steering control module for proper operation.
4. Test the steering angle sensor to ensure it is functioning correctly.
5. Perform a visual inspection of the vehicle’s battery and charging system.
6. Clear the DTC and take the vehicle for a test drive to see if the code reappears.

How to fix DTC C1443 step-by-step instructions

To fix DTC C1443, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on electrical components.
2. Inspect the wiring and connectors in the Steering Phase A circuit for any signs of damage or corrosion.
3. Repair or replace any damaged wiring or connectors as necessary.
4. Test the power steering control module and replace it if it is found to be faulty.
5. Check the steering angle sensor and replace it if it is not functioning correctly.
6. Reconnect the battery and clear the DTC using an OBD-II scanner.
7. Take the vehicle for a test drive to ensure the issue is resolved and the code does not reappear.

How to erase DTC C1443

To erase DTC C1443, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Follow the prompts to clear the trouble codes from the vehicle’s computer.
5. Disconnect the scanner and start the vehicle to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.