C1444 – OBD-II DTC

OBD-II DTC C1444 – Steering Phase B Circuit Short To Ground

DTC C1444 meaning

DTC C1444 refers to a diagnostic trouble code indicating a problem with the Steering Phase B Circuit. Specifically, it signifies a short to ground condition in the circuit, which can affect the performance of the steering system. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle components for faults.

DTC C1444 symptoms

Common symptoms associated with DTC C1444 may include:

• Steering wheel feels loose or unresponsive
• Warning lights illuminated on the dashboard, particularly the steering or traction control lights
• Difficulty in steering, especially at low speeds
• Increased effort required to turn the steering wheel

DTC C1444 causes

Several factors can lead to the occurrence of DTC C1444, including:

• Wiring issues, such as frayed or damaged wires in the steering circuit
• Faulty connectors that may not be making proper contact
• Defective steering angle sensor or related components
• Moisture or corrosion in the electrical connections
• Issues with the power steering control module

DTC C1444 seriousness

DTC C1444 is considered a serious issue as it can directly impact the vehicle’s steering performance. If left unaddressed, it may lead to:

• Increased risk of accidents due to impaired steering control
• Potential damage to the steering system components
• Inability to use advanced driver-assistance systems (ADAS) that rely on accurate steering data

How to diagnose DTC C1444

To diagnose DTC C1444, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the C1444 code.
2. Inspect the wiring and connectors associated with the steering phase B circuit for any visible damage.
3. Check the steering angle sensor for proper operation and calibration.
4. Test the continuity of the circuit to ensure there are no shorts to ground.
5. Examine the power steering control module for faults or error codes.

How to fix DTC C1444 step-by-step instructions

To fix DTC C1444, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the electrical system.
2. Inspect and repair any damaged wiring or connectors in the steering phase B circuit.
3. Replace the steering angle sensor if it is found to be faulty.
4. Ensure all connections are clean and free of corrosion, applying dielectric grease if necessary.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Test drive the vehicle to ensure the issue is resolved and the code does not reappear.

How to erase DTC C1444

To erase DTC C1444 from the vehicle’s computer, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.