C1455 – OBD-II DTC

OBD-II DTC C1455 – Accelerometer Front Circuit Failure

DTC C1455 meaning

DTC C1455 refers to a diagnostic trouble code indicating a failure in the front accelerometer circuit. The accelerometer is a critical component in vehicles equipped with stability control systems, as it measures the vehicle’s acceleration forces. When this circuit fails, it can lead to inaccurate readings, affecting the vehicle’s stability control and traction control systems.

DTC C1455 symptoms

Common symptoms associated with DTC C1455 may include:

• Illumination of the check engine light or stability control warning light
• Inconsistent or erratic vehicle handling
• Loss of traction control or stability control functionality
• Potential activation of other related warning lights

DTC C1455 causes

Several factors can lead to the occurrence of DTC C1455, including:

• Faulty front accelerometer sensor
• Wiring issues, such as shorts or open circuits in the accelerometer circuit
• Corrosion or poor connections in the electrical connectors
• Faulty electronic control unit (ECU) or software issues

DTC C1455 seriousness

DTC C1455 is considered a serious issue as it directly impacts the vehicle’s stability and traction control systems. If left unaddressed, it can lead to compromised vehicle handling, increasing the risk of accidents, especially in adverse driving conditions. It is advisable to diagnose and repair this issue promptly.

How to diagnose DTC C1455

To diagnose DTC C1455, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the C1455 code.
2. Inspect the wiring and connectors associated with the front accelerometer for damage or corrosion.
3. Test the front accelerometer sensor using a multimeter to check for proper voltage and resistance.
4. Check for any additional trouble codes that may provide further insight into the issue.
5. Consult the vehicle’s service manual for specific testing procedures related to the accelerometer circuit.

How to fix DTC C1455 step-by-step instructions

To fix DTC C1455, follow these step-by-step instructions:

1. Clear the DTC using an OBD-II scanner.
2. Inspect and repair any damaged wiring or connectors related to the front accelerometer.
3. If the wiring is intact, replace the front accelerometer sensor if it is found to be faulty.
4. Recheck the connections to ensure they are secure and free of corrosion.
5. Reconnect the battery if it was disconnected during repairs.
6. Start the vehicle and monitor for any reoccurrence of the DTC.

How to erase DTC C1455

To erase DTC C1455, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.