C1467 – OBD-II DTC

OBD-II DTC C1467 – Damper High Side Rear Circuit Short To Battery

DTC C1467 meaning

DTC C1467 refers to a diagnostic trouble code indicating a short circuit in the high side of the rear damper circuit. This code is typically associated with the vehicle’s suspension system, specifically the electronic dampers that adjust the ride quality and handling characteristics. A short to battery means that the circuit is receiving an unintended voltage, which can lead to improper functioning of the dampers.

DTC C1467 symptoms

Common symptoms associated with DTC C1467 may include:

• Warning lights on the dashboard, such as the suspension or check engine light.
• Inconsistent or poor ride quality.
• Unusual noises from the suspension system.
• Inability to adjust the suspension settings.
• Potential loss of vehicle stability or handling issues.

DTC C1467 causes

Several factors can lead to the occurrence of DTC C1467, including:

• Wiring issues, such as frayed or damaged wires in the damper circuit.
• Faulty connectors that may be corroded or loose.
• Defective electronic dampers or control modules.
• Short circuits caused by moisture intrusion or physical damage.
• Improper installation of aftermarket suspension components.

DTC C1467 seriousness

The seriousness of DTC C1467 can vary based on the symptoms and the vehicle’s condition. It is important to address this code promptly because:

• It can affect vehicle handling and safety.
• Ignoring the issue may lead to further damage to the suspension system.
• It may result in a failure of the vehicle to pass emissions testing.

How to diagnose DTC C1467

To diagnose DTC C1467, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Inspect the wiring and connectors related to the rear damper circuit for any visible damage.
3. Check for any additional trouble codes that may provide more context.
4. Test the voltage and ground at the damper connector to ensure proper operation.
5. Perform a continuity test on the wiring to check for shorts to battery.
6. Examine the electronic dampers and control module for faults.

How to fix DTC C1467 step-by-step instructions

To fix DTC C1467, follow these step-by-step instructions:

1. Clear the DTC using an OBD-II scanner.
2. Inspect and repair any damaged wiring or connectors in the rear damper circuit.
3. Replace any faulty electronic dampers or control modules as needed.
4. Ensure all connections are secure and free from corrosion.
5. Recheck the system by performing a test drive to see if the code reappears.
6. If the code does not return, the issue is likely resolved.

How to erase DTC C1467

To erase DTC C1467, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the option to clear or erase trouble codes on the scanner.
4. Confirm the action to erase the codes.
5. Disconnect the scanner and start the vehicle to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.