C1495 – OBD-II DTC

OBD-II DTC C1495 – Traction Control Motor Potentiometer Circuit Failure

DTC C1495 meaning

DTC C1495 refers to a fault in the traction control motor potentiometer circuit. This code indicates that the vehicle’s traction control system has detected an issue with the potentiometer that measures the position of the traction control motor. The potentiometer is crucial for providing feedback to the vehicle’s control module, allowing it to manage traction effectively.

DTC C1495 symptoms

Common symptoms associated with DTC C1495 may include:

• Illumination of the traction control warning light on the dashboard
• Reduced traction control functionality
• Unusual vehicle behavior during acceleration or cornering
• Potential activation of the ABS warning light

DTC C1495 causes

Several factors can lead to the triggering of DTC C1495, including:

• Faulty traction control motor potentiometer
• Wiring issues, such as shorts or open circuits in the potentiometer circuit
• Corrosion or poor connections at the potentiometer or control module
• Malfunctioning traction control module

DTC C1495 seriousness

DTC C1495 is considered a moderate to serious issue. While the vehicle may still be operable, the lack of proper traction control can lead to reduced vehicle stability, especially in adverse weather conditions. It is important to address this code promptly to ensure safe driving conditions.

How to diagnose DTC C1495

To diagnose DTC C1495, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the C1495 code.
2. Inspect the wiring and connectors associated with the traction control motor potentiometer for damage or corrosion.
3. Test the potentiometer using a multimeter to check for proper resistance values.
4. Check the traction control module for any additional fault codes that may provide further insight.
5. Perform a visual inspection of the traction control system components for any signs of wear or damage.

How to fix DTC C1495 step-by-step instructions

To fix DTC C1495, follow these steps:

1. Repair or replace any damaged wiring or connectors found during the diagnosis.
2. If the potentiometer is faulty, replace it with a new one.
3. Clear the DTC using an OBD-II scanner.
4. Test drive the vehicle to ensure the traction control system is functioning correctly and the code does not reappear.
5. If the code returns, further diagnose the traction control module and related components.

How to erase DTC C1495

To erase DTC C1495, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Navigate to the option to clear or erase trouble codes on the scanner.
4. Confirm the action to erase the DTC.
5. Disconnect the scanner and start the vehicle to verify that the code has been cleared.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.