C1499 – OBD-II DTC

OBD-II DTC C1499 – Transfer Case Contact Plate “A” Encoder Circuit Failure

DTC C1499 meaning

DTC C1499 refers to a failure in the Transfer Case Contact Plate “A” Encoder Circuit. This diagnostic trouble code indicates that the vehicle’s onboard diagnostic system has detected an issue with the encoder circuit responsible for relaying information about the transfer case’s position and operation. The transfer case is crucial for managing power distribution between the front and rear axles, especially in four-wheel-drive vehicles.

DTC C1499 symptoms

Common symptoms associated with DTC C1499 may include:

• Inability to engage or disengage four-wheel drive
• Erratic or incorrect transfer case operation
• Warning lights illuminated on the dashboard
• Unusual noises from the transfer case
• Vehicle may enter limp mode

DTC C1499 causes

Several factors can lead to the triggering of DTC C1499, including:

• Faulty transfer case encoder motor
• Damaged wiring or connectors in the encoder circuit
• Corrosion or poor connections at the contact plate
• Malfunctioning transfer case control module
• Software issues in the vehicle’s control systems

DTC C1499 seriousness

DTC C1499 can be considered serious, particularly for vehicles that rely on four-wheel drive for safe operation. If left unaddressed, it may lead to:

• Inability to drive in adverse weather conditions
• Increased wear and tear on drivetrain components
• Potential for further electrical issues
• Safety risks due to loss of vehicle control

How to diagnose DTC C1499

To diagnose DTC C1499, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC C1499.
2. Inspect the transfer case encoder motor and wiring for visible damage.
3. Check the connectors for corrosion or loose connections.
4. Test the encoder motor operation using a multimeter.
5. Examine the transfer case control module for faults.
6. Clear the code and perform a road test to see if the code reappears.

How to fix DTC C1499 step-by-step instructions

To fix DTC C1499, follow these steps:

1. Inspect and repair any damaged wiring or connectors in the encoder circuit.
2. Replace the transfer case encoder motor if it is found to be faulty.
3. Clean any corrosion from connectors and ensure secure connections.
4. Update or reprogram the transfer case control module if necessary.
5. Clear the DTC using an OBD-II scanner.
6. Test drive the vehicle to ensure the issue is resolved and the code does not return.

How to erase DTC C1499

To erase DTC C1499, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to verify that the code has been cleared.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.