C1699 – OBD-II DTC

OBD-II DTC C1699 – Left Rear Sensor Circuit Short to Vbat

DTC C1699 meaning

DTC C1699 refers to a diagnostic trouble code indicating a short circuit in the left rear sensor circuit, specifically a short to battery voltage (Vbat). This code is typically associated with the vehicle’s anti-lock braking system (ABS) or traction control system, which relies on various sensors to monitor wheel speed and other parameters. When the left rear sensor circuit experiences a short to Vbat, it can lead to incorrect readings and affect the overall performance of the braking system.

DTC C1699 symptoms

Common symptoms associated with DTC C1699 may include:

• Illumination of the ABS warning light on the dashboard
• Loss of ABS functionality
• Increased stopping distances
• Unusual behavior of the traction control system
• Potential activation of the brake warning light

DTC C1699 causes

Several factors can lead to the occurrence of DTC C1699, including:

• Damaged or frayed wiring in the left rear sensor circuit
• Corroded connectors or terminals
• Faulty left rear wheel speed sensor
• Short circuit due to moisture or debris
• Issues with the ABS control module

DTC C1699 seriousness

DTC C1699 is considered a serious issue as it directly impacts the vehicle’s braking system. The ABS and traction control systems are crucial for maintaining vehicle stability and safety, especially in adverse driving conditions. Ignoring this code can lead to compromised braking performance, increasing the risk of accidents.

How to diagnose DTC C1699

To diagnose DTC C1699, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the C1699 code.
2. Inspect the left rear sensor wiring and connectors for visible damage or corrosion.
3. Check the resistance of the left rear wheel speed sensor using a multimeter.
4. Test the voltage supply to the sensor to ensure it is within specifications.
5. Examine the ABS control module for any faults or issues.

How to fix DTC C1699 step-by-step instructions

To fix DTC C1699, follow these steps:

1. Repair or replace any damaged wiring or connectors in the left rear sensor circuit.
2. Replace the left rear wheel speed sensor if it is found to be faulty.
3. Clean any corrosion from connectors and ensure a secure connection.
4. Check the ABS control module for any software updates or faults.
5. Clear the DTC using an OBD-II scanner and perform a test drive to verify the fix.

How to erase DTC C1699

To erase DTC C1699, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.