C1700 – OBD-II DTC

OBD-II DTC C1700 – Left Rear Sensor Circuit Failure

DTC C1700 meaning

DTC C1700 refers to a fault in the left rear sensor circuit of a vehicle’s system, typically related to the anti-lock braking system (ABS) or traction control. This code indicates that the vehicle’s onboard diagnostic system has detected an issue with the left rear wheel speed sensor or its associated wiring and connectors.

DTC C1700 symptoms

Common symptoms associated with DTC C1700 may include:

• Illumination of the ABS warning light on the dashboard
• Decreased effectiveness of the ABS system
• Unusual braking behavior, such as locking up or skidding
• Traction control system malfunctions
• Inconsistent wheel speed readings during diagnostic tests

DTC C1700 causes

Several factors can lead to the triggering of DTC C1700, including:

• Faulty left rear wheel speed sensor
• Damaged or frayed wiring in the sensor circuit
• Corroded or loose electrical connectors
• Issues with the ABS control module
• Mechanical problems with the wheel hub or bearing

DTC C1700 seriousness

DTC C1700 is considered a serious issue as it can affect the vehicle’s braking performance and overall safety. If left unaddressed, it may lead to compromised braking efficiency, increasing the risk of accidents. It is advisable to diagnose and repair this issue promptly.

How to diagnose DTC C1700

To diagnose DTC C1700, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC C1700.
2. Inspect the left rear wheel speed sensor for physical damage or disconnection.
3. Check the wiring and connectors for signs of wear, corrosion, or loose connections.
4. Test the resistance and voltage of the wheel speed sensor using a multimeter.
5. Examine the ABS control module for any faults or error codes.
6. Perform a road test to observe the behavior of the ABS system.

How to fix DTC C1700 step-by-step instructions

To fix DTC C1700, follow these steps:

1. Disconnect the vehicle’s battery to ensure safety while working on electrical components.
2. Inspect and replace the left rear wheel speed sensor if it is found to be faulty.
3. Repair or replace any damaged wiring or connectors in the sensor circuit.
4. Reconnect the ABS control module and ensure all connections are secure.
5. Reconnect the vehicle’s battery.
6. Clear the DTC using an OBD-II scanner and perform a test drive to verify the repair.

How to erase DTC C1700

To erase DTC C1700, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.