C1706 – OBD-II DTC

OBD-II DTC C1706 – Left Rear Center Sensor Circuit Failure

DTC C1706 meaning

DTC C1706 refers to a fault in the Left Rear Center Sensor Circuit. This diagnostic trouble code indicates that the vehicle’s onboard diagnostic system has detected a malfunction in the circuit associated with the left rear center sensor, which is typically part of the vehicle’s safety and stability systems.

DTC C1706 symptoms

Common symptoms associated with DTC C1706 may include:

• Illumination of the warning lights on the dashboard, such as the ABS or traction control lights.
• Inconsistent or erratic behavior of the vehicle’s stability control system.
• Possible issues with the anti-lock braking system (ABS).
• Decreased performance of the vehicle’s safety features.

DTC C1706 causes

Several factors can lead to the occurrence of DTC C1706, including:

• Faulty left rear center sensor.
• Wiring issues, such as damaged or corroded wires in the sensor circuit.
• Poor electrical connections or loose connectors.
• Malfunctioning control module that processes sensor data.

DTC C1706 seriousness

The seriousness of DTC C1706 can vary based on the vehicle’s design and the specific systems affected. However, it is generally considered a moderate to serious issue because:

• It can impact the vehicle’s stability and braking performance.
• It may lead to reduced effectiveness of safety features.
• Ignoring the code could result in further damage to the vehicle’s systems.

How to diagnose DTC C1706

To diagnose DTC C1706, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the C1706 code.
2. Inspect the left rear center sensor and its wiring for visible damage or corrosion.
3. Check the electrical connections for tightness and cleanliness.
4. Test the sensor’s resistance and voltage output according to manufacturer specifications.
5. Examine the vehicle’s control module for any related fault codes.

How to fix DTC C1706 step-by-step instructions

To fix DTC C1706, follow these steps:

1. Repair or replace any damaged wiring or connectors associated with the left rear center sensor.
2. If the sensor is faulty, replace it with a new one.
3. Clear any fault codes using an OBD-II scanner.
4. Test drive the vehicle to ensure the issue is resolved and the warning lights do not reappear.
5. Re-scan the vehicle to confirm that DTC C1706 has not returned.

How to erase DTC C1706

To erase DTC C1706, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear Codes” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and turn off the ignition.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.