C1708 – OBD-II DTC

OBD-II DTC C1708 – Right Rear Center Sensor Circuit Short to Vbat

DTC C1708 meaning

DTC C1708 refers to a diagnostic trouble code indicating a short circuit in the right rear center sensor circuit to battery voltage (Vbat). This code is typically associated with the vehicle’s airbag system, specifically the sensors that monitor the status and deployment of airbags. A short to Vbat suggests that the circuit is receiving an unintended voltage, which can lead to improper sensor readings and potential airbag system malfunctions.

DTC C1708 symptoms

Common symptoms associated with DTC C1708 may include:

• Illumination of the airbag warning light on the dashboard
• Possible malfunction of the airbag system
• Inconsistent or erroneous readings from the right rear center sensor
• Potential failure of the airbag to deploy in the event of a collision

DTC C1708 causes

Several factors can lead to the occurrence of DTC C1708, including:

• Wiring issues such as frayed or damaged wires in the right rear center sensor circuit
• Corrosion or poor connections at the sensor or connector terminals
• Faulty right rear center sensor
• Issues with the airbag control module

DTC C1708 seriousness

DTC C1708 is considered serious because it directly affects the airbag system’s functionality. If the airbag system is compromised, it may not deploy during an accident, increasing the risk of injury to occupants. Therefore, it is crucial to address this code promptly to ensure the safety of the vehicle’s occupants.

How to diagnose DTC C1708

To diagnose DTC C1708, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the C1708 code.
2. Inspect the wiring and connectors associated with the right rear center sensor for any visible damage or corrosion.
3. Check the resistance and voltage at the sensor to ensure it is within manufacturer specifications.
4. Test the right rear center sensor using a multimeter to determine if it is functioning correctly.
5. Examine the airbag control module for any additional codes or faults.

How to fix DTC C1708 step-by-step instructions

To fix DTC C1708, follow these steps:

1. Disconnect the vehicle’s battery to ensure safety while working on the airbag system.
2. Inspect and repair any damaged wiring or connectors in the right rear center sensor circuit.
3. If the sensor is faulty, replace it with a new one that meets manufacturer specifications.
4. Reconnect all connectors and ensure they are secure and free of corrosion.
5. Reconnect the vehicle’s battery.
6. Clear the DTC using an OBD-II scanner and perform a test drive to verify that the code does not return.

How to erase DTC C1708

To erase DTC C1708, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and turn off the ignition.
6. Start the vehicle and monitor for any reoccurrence of the C1708 code.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.