C1710 – OBD-II DTC

OBD-II DTC C1710 – Right Rear Center Sensor Circuit Fault

DTC C1710 meaning

DTC C1710 refers to a fault in the right rear center sensor circuit within a vehicle’s diagnostic system. This code indicates that the vehicle’s onboard diagnostics have detected an issue with the sensor responsible for monitoring various parameters, such as impact or position, in the right rear area of the vehicle. The sensor is crucial for systems like airbag deployment and stability control.

DTC C1710 symptoms

Common symptoms associated with DTC C1710 may include:

• Illumination of the warning light on the dashboard
• Inconsistent or erratic behavior of the vehicle’s stability control system
• Potential issues with airbag deployment in the event of a collision
• Diagnostic trouble codes related to the sensor may be present

DTC C1710 causes

Several factors can lead to the occurrence of DTC C1710, including:

• Faulty right rear center sensor
• Wiring issues, such as frayed or damaged wires
• Corrosion or poor connections in the sensor circuit
• Faulty electronic control unit (ECU) or software issues
• Physical damage to the sensor due to an accident or impact

DTC C1710 seriousness

The seriousness of DTC C1710 can vary based on the vehicle’s systems affected. It is important to address this code promptly because:

• It may compromise the effectiveness of the airbag system, increasing the risk of injury in a collision.
• It can affect the vehicle’s stability control, leading to handling issues.
• Ignoring the code may result in further damage to the vehicle’s electrical system.

How to diagnose DTC C1710

To diagnose DTC C1710, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC C1710.
2. Inspect the right rear center sensor and its wiring for visible damage or corrosion.
3. Check the sensor’s electrical connections for tightness and cleanliness.
4. Test the sensor’s resistance and voltage according to the manufacturer’s specifications.
5. Examine the vehicle’s ECU for any software updates or faults.
6. Clear the code and perform a test drive to see if the code returns.

How to fix DTC C1710 step-by-step instructions

To fix DTC C1710, follow these step-by-step instructions:

1. Gather necessary tools, including an OBD-II scanner, multimeter, and basic hand tools.
2. Disconnect the vehicle’s battery to ensure safety while working on the electrical system.
3. Inspect the right rear center sensor and wiring for any visible damage.
4. If damage is found, replace the sensor or repair the wiring as needed.
5. Reconnect any loose or corroded connections to ensure proper contact.
6. Reconnect the vehicle’s battery.
7. Use the OBD-II scanner to clear the DTC and perform a test drive.
8. Monitor the system to ensure the code does not return.

How to erase DTC C1710

To erase DTC C1710, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Access the scanner’s menu and select the option to read or clear trouble codes.
4. Choose the option to erase the DTCs.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and turn off the ignition.
7. Start the vehicle and monitor for any reoccurrence of the code.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.