C1736 – OBD-II DTC

OBD-II DTC C1736 – Air Suspension LR Corner Down Timeout

DTC C1736 meaning

DTC C1736 refers to a diagnostic trouble code indicating an “Air Suspension LR Corner Down Timeout.” This code is triggered when the air suspension system detects that the left rear corner of the vehicle is not responding as expected during a leveling or adjustment process. The system monitors the height of the vehicle and if it fails to reach the desired level within a specified time frame, this code is set.

DTC C1736 symptoms

Common symptoms associated with DTC C1736 may include:

• Uneven ride height, particularly at the left rear corner
• Warning lights on the dashboard related to the air suspension
• Increased noise from the air suspension system
• Possible loss of ride comfort or handling issues

DTC C1736 causes

Several factors can lead to the triggering of DTC C1736, including:

• Faulty air suspension compressor
• Leaking air springs or bags
• Blocked or damaged air lines
• Malfunctioning height sensors
• Electrical issues such as short circuits or open circuits in the wiring
• Faulty control module for the air suspension system

DTC C1736 seriousness

DTC C1736 can be considered serious as it affects the vehicle’s ride quality and handling. If left unaddressed, it may lead to further damage to the air suspension components or compromise vehicle safety. It is advisable to diagnose and repair the issue promptly to ensure optimal vehicle performance.

How to diagnose DTC C1736

To diagnose DTC C1736, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the C1736 code.
2. Inspect the air suspension system for visible damage or leaks.
3. Check the operation of the air suspension compressor.
4. Test the height sensors for proper function.
5. Examine the wiring and connectors for any signs of wear or damage.
6. Perform a system reset and observe if the code reappears after a test drive.

How to fix DTC C1736 step-by-step instructions

To fix DTC C1736, follow these step-by-step instructions:

1. Confirm the DTC using an OBD-II scanner.
2. Inspect the air suspension components for leaks or damage.
3. Replace any damaged air springs or bags.
4. Repair or replace the air suspension compressor if it is not functioning properly.
5. Check and replace any faulty height sensors.
6. Fix any damaged wiring or connectors in the air suspension system.
7. Clear the DTC using the OBD-II scanner and perform a test drive to ensure the issue is resolved.

How to erase DTC C1736

To erase DTC C1736, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to check if the code reappears.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.