C1739 – OBD-II DTC

OBD-II DTC C1739 – Right Front Center Sensor Circuit Short to Vbat

DTC C1739 meaning

DTC C1739 refers to a diagnostic trouble code indicating a short circuit in the right front center sensor circuit, specifically a short to battery voltage (Vbat). This code is part of the vehicle’s airbag system diagnostics and suggests that the sensor is receiving an incorrect voltage level, which can affect the airbag deployment functionality.

DTC C1739 symptoms

Common symptoms associated with DTC C1739 may include:

• Illumination of the airbag warning light on the dashboard
• Potential malfunction of the airbag system
• Inconsistent or erratic behavior of the airbag system
• Possible failure of the airbag to deploy in the event of a collision

DTC C1739 causes

Several factors can lead to the occurrence of DTC C1739, including:

• Faulty right front center sensor
• Wiring issues such as frayed or damaged wires
• Corrosion or poor connections in the sensor circuit
• Short circuit in the wiring harness
• Faulty airbag control module

DTC C1739 seriousness

DTC C1739 is considered serious because it directly impacts the airbag system’s functionality. If the airbag system is compromised, it may not deploy during an accident, increasing the risk of injury. Therefore, it is crucial to address this code promptly to ensure passenger safety.

How to diagnose DTC C1739

To diagnose DTC C1739, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Inspect the right front center sensor and its wiring for visible damage.
3. Check for any loose or corroded connections in the sensor circuit.
4. Test the voltage at the sensor connector to ensure it is within specifications.
5. Perform a continuity test on the wiring harness to check for shorts.
6. Replace the sensor or repair the wiring as necessary.

How to fix DTC C1739 step-by-step instructions

To fix DTC C1739, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the airbag system.
2. Locate the right front center sensor and inspect it for physical damage.
3. Examine the wiring harness for any signs of wear, fraying, or corrosion.
4. Repair or replace any damaged wiring or connectors.
5. Test the sensor with a multimeter to ensure it is functioning correctly.
6. Reconnect the sensor and wiring, then reconnect the battery.
7. Clear the DTC using an OBD-II scanner and perform a test drive to verify the fix.

How to erase DTC C1739

To erase DTC C1739, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the trouble codes section on the scanner.
4. Select the option to clear or erase the codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and start the vehicle to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.