C1741 – OBD-II DTC

OBD-II DTC C1741 – Right Front Center Sensor Circuit Fault

DTC C1741 meaning

DTC C1741 refers to a fault in the Right Front Center Sensor Circuit. This diagnostic trouble code indicates that the vehicle’s onboard diagnostic system has detected an issue with the sensor responsible for monitoring the right front area, which is crucial for various safety systems, including airbag deployment and stability control.

DTC C1741 symptoms

Common symptoms associated with DTC C1741 may include:

• Illumination of the warning light on the dashboard
• Inconsistent or erratic readings from the right front sensor
• Potential issues with airbag deployment in the event of a collision
• Decreased performance of stability control systems

DTC C1741 causes

Several factors can lead to the triggering of DTC C1741, including:

• Faulty right front center sensor
• Wiring issues, such as shorts or open circuits in the sensor circuit
• Corrosion or poor connections at the sensor or connector
• Faulty vehicle control module (VCM) or airbag control module

DTC C1741 seriousness

The seriousness of DTC C1741 should not be underestimated, as it can affect critical safety systems in the vehicle. If left unaddressed, it may lead to:

• Increased risk of airbag failure during an accident
• Compromised vehicle stability and handling
• Potential for further damage to the vehicle’s electrical system

How to diagnose DTC C1741

To diagnose DTC C1741, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC C1741.
2. Inspect the right front center sensor and its wiring for visible damage or corrosion.
3. Check the sensor connector for secure connections and signs of wear.
4. Test the sensor’s resistance and voltage according to manufacturer specifications.
5. Examine the vehicle control module for any related fault codes.
6. Clear the codes and perform a road test to see if the code reappears.

How to fix DTC C1741 step-by-step instructions

To fix DTC C1741, follow these step-by-step instructions:

1. Ensure the vehicle is turned off and disconnect the battery.
2. Inspect and repair any damaged wiring or connectors related to the right front center sensor.
3. If the sensor is faulty, replace it with a new one that meets OEM specifications.
4. Reconnect the battery and clear the DTC using an OBD-II scanner.
5. Perform a road test to verify that the issue has been resolved and the code does not return.

How to erase DTC C1741

To erase DTC C1741, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and perform a test drive to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.