C1753 – OBD-II DTC

OBD-II DTC C1753 – Hydraulic Clutch Actuator Valve Signal Fault

DTC C1753 meaning

DTC C1753 refers to a fault in the hydraulic clutch actuator valve signal. This code indicates that the vehicle’s onboard diagnostic system has detected an issue with the signal being sent from the hydraulic clutch actuator valve, which is responsible for controlling the engagement and disengagement of the clutch in vehicles equipped with a hydraulic clutch system.

DTC C1753 symptoms

Common symptoms associated with DTC C1753 may include:

• Difficulty in shifting gears
• Clutch slipping or not engaging properly
• Unusual noises when operating the clutch
• Warning lights illuminated on the dashboard
• Increased pedal effort required to engage the clutch

DTC C1753 causes

Several factors can lead to the occurrence of DTC C1753, including:

• Faulty hydraulic clutch actuator valve
• Wiring issues such as shorts or open circuits
• Corroded or damaged connectors
• Low hydraulic fluid levels or contamination
• Malfunctioning clutch master or slave cylinder

DTC C1753 seriousness

DTC C1753 is considered a serious issue as it can affect the vehicle’s ability to shift gears properly. If left unaddressed, it may lead to further damage to the clutch system, increased wear on transmission components, and potentially unsafe driving conditions.

How to diagnose DTC C1753

To diagnose DTC C1753, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Inspect the hydraulic clutch actuator valve and associated wiring for visible damage.
3. Check the hydraulic fluid level and condition.
4. Test the hydraulic clutch actuator valve for proper operation.
5. Examine connectors for corrosion or loose connections.
6. Perform a continuity test on the wiring to ensure there are no breaks.

How to fix DTC C1753 step-by-step instructions

To fix DTC C1753, follow these steps:

1. Address any wiring issues by repairing or replacing damaged wires and connectors.
2. Replace the hydraulic clutch actuator valve if it is found to be faulty.
3. Flush and replace contaminated hydraulic fluid if necessary.
4. Inspect and replace the clutch master or slave cylinder if they are malfunctioning.
5. Clear the DTC using an OBD-II scanner and test drive the vehicle to ensure the issue is resolved.

How to erase DTC C1753

To erase DTC C1753, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble code.
5. Disconnect the scanner and start the vehicle to verify that the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.