C1758 – OBD-II DTC

OBD-II DTC C1758 – Air Suspension Front Height Sensor High (SE) Signal Circuit Short To Battery

DTC C1758 meaning

DTC C1758 refers to a diagnostic trouble code indicating a problem with the air suspension front height sensor. Specifically, it signifies that there is a high signal circuit short to battery in the sensor’s signal circuit. This can lead to incorrect readings of the vehicle’s height, affecting the air suspension system’s performance and functionality.

DTC C1758 symptoms

Common symptoms associated with DTC C1758 may include:

• Warning light illuminated on the dashboard
• Inconsistent or incorrect air suspension height
• Vehicle may sit too high or too low
• Unusual noises from the air suspension system
• Decreased ride quality or handling issues

DTC C1758 causes

Several factors can lead to the occurrence of DTC C1758, including:

• Short circuit in the front height sensor wiring
• Faulty front height sensor
• Corroded or damaged connectors
• Issues with the air suspension control module
• Electrical interference or grounding issues

DTC C1758 seriousness

DTC C1758 is considered a serious issue as it directly affects the vehicle’s air suspension system. If left unaddressed, it can lead to:

• Increased wear on suspension components
• Potential safety hazards due to improper vehicle height
• Further damage to the air suspension system
• Inability to maintain proper ride quality

How to diagnose DTC C1758

To diagnose DTC C1758, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Inspect the front height sensor wiring and connectors for damage or corrosion.
3. Check the voltage and ground at the height sensor using a multimeter.
4. Test the front height sensor for proper operation.
5. Examine the air suspension control module for faults.

How to fix DTC C1758 step-by-step instructions

To fix DTC C1758, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety.
2. Inspect and repair any damaged wiring or connectors related to the front height sensor.
3. Replace the front height sensor if it is found to be faulty.
4. Reconnect the battery and clear the DTC using an OBD-II scanner.
5. Test drive the vehicle to ensure the issue is resolved and the warning light does not reappear.

How to erase DTC C1758

To erase DTC C1758, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the trouble codes section on the scanner.
4. Select the option to clear or erase the codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and start the vehicle to verify that the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.