C1759 – OBD-II DTC

OBD-II DTC C1759 – Air Suspension Front Height Sensor High (SE) Signal Circuit Short To Ground

DTC C1759 meaning

DTC C1759 refers to a diagnostic trouble code indicating a problem with the air suspension system, specifically related to the front height sensor. The code signifies that there is a high signal detected from the front height sensor, which is interpreted as a short circuit to ground in the signal circuit. This can affect the vehicle’s ability to maintain proper ride height and suspension performance.

DTC C1759 symptoms

Common symptoms associated with DTC C1759 may include:

• Warning lights on the dashboard, such as the air suspension warning light.
• Inconsistent or incorrect ride height of the vehicle.
• Unusual noises from the suspension system.
• Decreased ride quality or handling issues.
• Possible vehicle sagging or lifting on one side.

DTC C1759 causes

Several factors can lead to the occurrence of DTC C1759, including:

• A short circuit in the wiring of the front height sensor.
• Faulty front height sensor itself.
• Corrosion or damage to the electrical connectors.
• Issues with the air suspension control module.
• Improper installation or alignment of the height sensor.

DTC C1759 seriousness

DTC C1759 is considered a serious issue as it directly impacts the vehicle’s suspension system. If left unaddressed, it can lead to:

• Increased wear on suspension components.
• Compromised vehicle stability and safety.
• Potential for further electrical issues within the air suspension system.
• Inability to maintain proper ride height, affecting handling and comfort.

How to diagnose DTC C1759

To diagnose DTC C1759, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the C1759 code.
2. Inspect the wiring and connectors associated with the front height sensor for damage or corrosion.
3. Check the resistance and voltage of the front height sensor using a multimeter.
4. Test the air suspension control module for proper operation.
5. Look for any additional trouble codes that may provide further insight into the issue.

How to fix DTC C1759 step-by-step instructions

To fix DTC C1759, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the electrical system.
2. Inspect and repair any damaged wiring or connectors related to the front height sensor.
3. If the front height sensor is faulty, replace it with a new one.
4. Reconnect all electrical connections and ensure they are secure.
5. Reconnect the vehicle’s battery.
6. Clear the DTC using an OBD-II scanner and perform a test drive to verify the issue is resolved.

How to erase DTC C1759

To erase DTC C1759, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Navigate to the trouble codes section on the scanner.
4. Select the option to clear or erase the codes.
5. Confirm the action and wait for the scanner to indicate that the codes have been cleared.
6. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.